Valgrind complains about a definitely lost block allocated in
intelNewTextureImage(). This leak was apparently created by
6e0f9001fe, "mesa: move
gl_texture_image::Data, RowStride, ImageOffsets to swrast", as it
removes the free() from _mesa_delete_texture_image().
Put the free() back, fixes a Valgrind error.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
There is no point in having them when we distribute eglext.h.
As for unofficial extensions, there is a chance that we might remove some of
them evetually. Keeping the #ifdef's for now should make that easier.
Previously, we advertised 0 VS texture units. Now that we have proper
support for using the sampling engine in the VS, we can advertise 16,
which is conveniently the number required for OpenGL 3.0.
v2: Enable on Gen4. I hacked up my tests to not use flat ivec varyings
and they pass.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This should avoid state-dependent FS recompiles when samplers that are
only used by the VS change.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The idea is to reuse this for the VS and (in the future) GS as well.
v2: Include yuvtex data since we're not dropping GL_MESA_ycbycr.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net> [v1]
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The visit() half computes the values to put in the header based on the
IR and simply stuffs that in the vec4_instruction; the emit() half uses
this to set up the message header. This works out well since emit() can
use brw_reg directly and access individual DWords without kludgery.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We'll want to reuse this for the VS, and it's complex enough that I'd
rather not cut and paste it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This translates the GLSL compiler's IR into vec4_instruction IR,
generating code to load coordinates, LOD info, shadow comparitors, and
so on into the appropriate message registers.
It turns out that the SIMD4x2 parameters are identical on Gen 5-7, and
the Gen4 code is similar enough that, unlike in the FS, it's easy enough
to support all generations in a single function.
v2: Load zeros for missing coordinates (fixing vs-texelFetch-sampler1D
and 2D on G45), and fix G45 message length for shadow comparisons.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This is the part that takes the vec4_instruction IR and turns it into
actual Gen ISA.
v2: Add Gen4 messages, don't retype m0 to UW.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Prior to Ironlake, cube maps were stored as 3D textures. In recent
refactoring, we removed a separate "layers" parameter in favor of using
depth. Unfortunately, depth was getting minified, which is only correct
for actual 3D textures.
Fixes piglit tests:
- bugs/crash-cubemap-order
- fbo/fbo-cubemap
- texturing/cubemap
Also changes texturing/cubemap npot from abort to fail.
This hasn't seen a full test run since Piglit on Mesa master hangs
GM45 a lot.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
All of the extensions require that both libGL and either the server or
the direct rendering driver (or both) enable the extension before it's
advertised. It seems safe to assume that none of the other components
on OS X will enable these extensions, so all the #ifdef blocks here
just clutter the code.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
There are a few unsupported extensions (e.g., the ATI and NV float
extensions) that are still in the list. There is some small chance
that these may be supported some day.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
__glXInitialize calls AllocAndFetchScreenConfigs.
AllocAndFetchScreenConfigs unconditionally sends a glXQuerySeverString
request to the server. This request is only supported with GLX 1.1 or
later, so we were already implicitly incompatible with GLX 1.0
servers. How many more similar bugs lurk in the code that nobody has
noticed in years?
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Previously the share_xid was only set in the glXImportContextEXT path,
and it was left set to None in all of the other create-context paths.
Fixes the piglit test glx-query-context-info-ext.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Send the DestroyContext protocol immediately when glXDestroyContext is
called, and never call it when glXFreeContextEXT is called. In both
cases, either destroy the client-side structures or, if the context is
current, set xid to None so that the client-side structures will be
destroyed later.
I believe this restores the behavior of the original SGI code. See
src/glx/x11 around commit 5df82c8. The spec doesn't say anything
about glXDestroyContext not really destroying imported contexts (it
acts like glXFreeContextEXT instead), but that's what the original
code did. Note that glXFreeContextEXT on a non-imported context does
not destroy it either.
Fixes the piglit test glx-free-context.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes the piglit test glx-get-context-id.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The primary problem was that the number of reply bytes read is clamped
to sizeof(propList), but the loop that processes the properties tries
to examine all of the properties sent by the server. If the server
sends 47,000 properties, we only read 3 but process all 47,000.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Each of the DRI, DRI2, and DRISW backends contain code like the
following in their create-context routine:
if (shareList) {
pcp_shared = (struct dri2_context *) shareList;
shared = pcp_shared->driContext;
}
This assumes that the glx_context *shareList is actually the correct
derived type. However, if shareList was created as an
indirect-rendering context, it will not be the expected type. As a
result, shared will contain garbage. This garbage will be passed to
the driver, and the driver will probably segfault. This can be
observed with the following GLX code:
ctx0 = glXCreateContext(dpy, visinfo, NULL, False);
ctx1 = glXCreateContext(dpy, visinfo, ctx0, True);
Create-context is the only case where this occurs. All other cases
where a context is passed to the backend, it is the 'this' pointer
(i.e., we got to the backend by call something from ctx->vtable).
To work around this, check that the shareList->vtable->destroy method
is the same as the destroy method of the expected type. We could also
check that shareList->vtable matches the vtable or by adding a "tag"
to glx_context to identify the derived type.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is not exposed generally yet because some of the swrast paths hit
in piglit (drawpixels, copypixels, blit) aren't yet converted to
MapRenderbuffer.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is a little more unusual than the separate MESA_FORMAT_S8_Z24
support, because in addition to storing the real stencil data in a
MESA_FORMAT_S8 miptree, we also make the Z miptree be
MESA_FORMAT_Z32_FLOAT instead of the requested format.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
With separate stencil GL_DEPTH32F_STENCIL8, the miptree will have a
really different format (MESA_FORMAT_Z32_FLOAT) from the teximage
(MESA_FORMAT_Z32_FLOAT_X24S8).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The format handling here is tricky, because we're not actually
generating a Z32_FLOAT_X24S8 miptree, so we're guessing the format
that GL wants based on seeing Z32_FLOAT with a separate stencil.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
All the operations were just trying to get at irb->wrapped_depth->mt,
which is the same as irb->mt now.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
gen7 only supports the non-packed formats, even if you associate a
real separate stencil buffer -- otherwise it's as if the depth test
always fails.
This requires a little bit of care in the match_texture_image case,
since the miptree format no longer matches the texture image format.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This little bit of logic was duplicated, which isn't much, but I was
going to need to duplicate a bit of additional logic in the next
commit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There were only two places it was really used at this point, which was
in the batchbuffer emit of the separate stencil packets for gen6/7.
Just write in the ->stencil_mt reference in those two places and ditch
all this flailing around with allocation and refcounts.
v2: Fix separate stencil on gen7.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
this mentions which channels are used for slice and depth comparison values.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The 4th texcoord is used in this case for the comparison.
This fixes piglit glsl-fs-shadow2DArray* on softpipe.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The code didn't handle the case where front wasn't specified in the vertex
shader outputs, but back was.
In that case we were doing a copy from back to non-existant front,
this code checks we have existant front/backs and only does the copy when
they both exist.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Pekka Paalanen