a185bcbdec
mesa: move gl_array_attrib::_MaxElement to gl_array_object::_MaxElement
...
This value is per array object.
2009-05-21 09:17:08 -06:00
899c524a49
vbo: s/8/MAX_TEXTURE_COORD_UNITS/
2009-05-21 09:17:08 -06:00
2c007517b5
cell: perform triangle cull a little earlier
...
In spu_tri.c:setup_sort_vertices() triangles are culled after the
vertices are sorted. This patch moves the check a little earlier
and performs the actual check a little faster through intrinsics and
a little trickery.
Reduced code size and less work is done before a triangle is deemed
OK to skip.
2009-05-21 08:19:00 -06:00
b4824520ec
cell: unroll inner loop of spu_render.c:cmd_render()
...
It was taking approximately 50 cycles to extract the vertex indices,
calculate the vertex_header pointers and call tri_draw() for each
three vertices - .
Unrolled, it takes less than 100 cycles to extract, unpack,
calculate pointers and call tri_draw() eight times. It does have a
nasty jump-tabled switch. I'm sure that there's a better way...
Code size of spu_render.o gets larger due to the extra constants and
work in the inner loop, there are extra stack saves and loads
because there are more registers in use, and an assert. spu_tri.o
gets a little smaller.
2009-05-21 08:18:03 -06:00
5b27b4ad37
st: add support for GL_EXT_vertex_array_bgra
2009-05-21 08:15:54 -06:00
3af0952bc9
r300-gallium: r500-fs: POW.
...
I feel so unclean.
2009-05-20 23:22:16 -07:00
cfd241e8a6
r300-gallium: r500-fs: LRP.
...
Goddammit. This cannot be the "easy way." :C
2009-05-20 21:52:11 -07:00
f1f0893eba
r300-gallium: r500-fs: Combine function.
2009-05-20 16:53:45 -07:00
d67fb5ea1d
r300-gallium: Prevent assert when fogcoords are present.
...
Seems like this file is the source of all bad logic. (Pun intended.)
2009-05-20 16:05:11 -07:00
d04c85d01b
r300-gallium: Another constantbuf shader recompile test.
...
Less briefly... Shaders need to be recompiled if their constantbuf
offsets have changed. However, since we only change them from shaders if
immediates need to be emitted, we shouldn't bother if the shader doesn't
use immediates.
2009-05-20 14:55:03 -07:00
4151c0ea91
r300-gallium: Raise constantbuf limits.
...
Still not correct, but really I don't care.
2009-05-20 14:38:22 -07:00
364a4a8293
r300-gallium: fs: Remove cruft from way back when.
2009-05-20 14:17:27 -07:00
0ba7f76233
radeon-gallium: Add surface_buffer_create callback.
2009-05-20 13:21:17 -07:00
9e8de1b911
r300-gallium: Make surface_copy actually load the texture in shader.
2009-05-20 12:22:24 -07:00
b22b6f0743
r300-gallium: Add missing R481 PCI ID.
...
Per 74cb2aba on xf86-video-ati.
2009-05-20 12:08:00 -07:00
65946ef081
r300-gallium: Make surface_copy work, and refactor buffer validation.
2009-05-20 11:46:26 -07:00
4550423211
radeon-gallium: Don't permit reading and writing a BO in one CS.
...
This fixes some silent problems in current libdrm_radeon.
surface_copy still locks up hard.
2009-05-20 07:18:08 -07:00
0c75cb5afe
st: reformatting, comments, var renaming
2009-05-19 20:05:28 -06:00
d0eccc4187
Merge branch 'mesa_7_5_branch'
2009-05-19 10:07:45 -06:00
042d9a5132
mesa: allow depth/stencil textures to be attached to GL_STENCIL_ATTACHMENT
...
See sourceforge bug #2793846 .
2009-05-19 09:59:01 -06:00
c99a60c40d
mesa: assign trb->Base.StencilBits in update_wrapper().
...
When we render to a depth/stencil texture there are stencil bits.
2009-05-19 09:57:01 -06:00
43d8ace88d
mesa: print more info when valid_texture_object() fails
2009-05-19 09:21:39 -06:00
bd59dd69ba
trace: Improve shader wrapping
2009-05-18 20:54:09 +01:00
7d11a392d7
st/dri: Only create new textures if drawable has changed
2009-05-18 20:54:09 +01:00
d0639d067e
r300-gallium: Fix (another) wrong value in MSPOS.
...
Again, thanks to agd5f.
2009-05-18 09:51:10 -07:00
026f4c97dc
radeon-gallium: Remove BO validation debug.
...
It appears that that area of code "just works" much like classic Mesa's
version, so might as well not waste scrollback on it.
2009-05-18 09:51:10 -07:00
5236ea3900
r300-gallium: Cleanup viewport state setup.
2009-05-18 09:51:09 -07:00
301d238c1a
r300-gallium: Always do VTE, never software viewport.
...
This makes glxgears draw properly with SW TCL.
2009-05-18 09:51:09 -07:00
edfbf7dccb
Merge branch 'mesa_7_5_branch'
...
Conflicts:
Makefile
src/mesa/main/version.h
2009-05-18 10:36:50 -06:00
7ce105d2e6
st/mesa: fix incorrect src/dst stride params to _mesa_generate_mipmap_level()
...
The stride needs to be in texels, not bytes.
2009-05-18 10:28:04 -06:00
adabd0e81e
mesa: comments for _mesa_generate_mipmap_level()
2009-05-18 10:27:31 -06:00
30320f0afb
softpipe: add texture target sanity check assertion
2009-05-18 10:13:44 -06:00
14e5bff97b
st: fix incorrect target parameter to screen->is_format_supported()
...
We were passing a GL texture target instead of a pipe_texture_target enum.
2009-05-18 10:12:40 -06:00
df37cde309
mesa: added linux-osmesa-static config
...
Contributed by Nicolas Noble. See SF bug #2792536
2009-05-18 08:47:22 -06:00
6e61700541
docs: link to 7.5 relnotes
2009-05-18 07:17:46 -06:00
da0d4e1db6
docs: emphasize the incomplete status of the nouveau/R300 gallium drivers
2009-05-18 07:17:36 -06:00
f2445dfd85
Initialize psp->waitX/waitGL for swrast_dri.so.
...
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=21053 .
2009-05-18 12:47:00 +02:00
27206add27
r300-gallium: Enable GLSL for r500.
...
Before you get all excited, this is *not* to be construed as actual support
for GLSL shaders. The GL version is still 1.3, and stuff still sucks. Just
flicking it on so that it can be tested and developed a bit easier.
2009-05-17 21:41:25 -07:00
9569221563
r300-gallium: r500-fs: DDX and DDY support.
...
Oh, look, GLSL instructions. I wonder what I'll do next.
2009-05-17 21:40:16 -07:00
0036f2ccba
dri-gallium: Add GLSL support.
...
Oh, look, it's more features. :3
2009-05-17 21:39:11 -07:00
06a7b798f2
r300-gallium: Add half-right COS and SIN.
...
HW trig does a premultiply by 2pi, where Mesa does another premultiply by pi.
This is a problem.
2009-05-17 21:10:07 -07:00
572d7d1358
r300-gallium: Size mismatch.
2009-05-17 20:49:39 -07:00
6a40d1e9d9
r300-gallium, radeon-gallium: Nuke gb_pipes from orbit.
...
See the previous commit for an explanation. This is just all the support code
for GB_TILE_CONFIG.
2009-05-17 17:03:15 -07:00
d6e085bd76
r300-gallium: Don't set GB_TILE_CONFIG (in userspace.)
...
This accompanies kernel patches that make GB_TILE_CONFIG's various members
completely controlled in DRM.
GB_TILE_CONFIG has the following controls:
- The number of GB (pixel) pipes enabled
- The size and style of tiling
- Subpixel precision (either 1/12 or 1/16)
Per airlied and glisse, userspace and kernel will now agree (always) on
a subpixel precision of 1/12, and tiling will always be kernel-controlled.
2009-05-17 16:44:39 -07:00
60665ae627
r300-gallium: Clean up more invariant state.
...
GA_ENHANCE is now the kernel's problem.
2009-05-17 13:23:39 -07:00
e5f5390f4b
r300-gallium: Update XXX.
...
Lops work fine as long as HW TCL is off. (I think I know why.)
2009-05-17 12:51:18 -07:00
fbcfcd9f5c
r300-gallium: Correct default MSPOS.
...
Per agd5f.
2009-05-17 11:58:53 -07:00
45435abcb9
r300-gallium: vs: Fix vert shader init.
...
Makes the last three commits suck much less. :3
2009-05-17 10:34:41 -07:00
8dae8f28e5
r300-gallium: r500-fs: Enable depth writes, kinda.
...
Should work, but doesn't. Hm.
2009-05-17 10:30:59 -07:00
7e97219ff8
r300-gallium: Comment out useless debugging code.
...
Those parts are nearly solid compared to the shaders.
2009-05-17 09:44:14 -07:00
Brian Paul