Now that we don't compile GLSL, we can roll back a few more hacks and
unexport some things from the backend compiler.
Signed-off-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
Gen9 changes the meaning of this to coarse LOD quality mode. Although that's a
desirable thing to be setting, it doesn't match the gen8 behavior and this was
unintentional. More importantly, we don't ever use this field. So instead of
getting it "wrong" drop it entirely.
This is a respin of a patch which only [incorrectly] tried to address gen9.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
round(val*dscale) produces a double result, as val and dscale are double.
However, LLVMConstInt receives unsigned long long, so there is an
implicit conversion from double to unsigned long long.
This is an undefined behavior. Therefore, we need to first explicitly
convert the round result to long long, and then let the compiler handle
conversion from that to unsigned long long.
This bug manifests itself in POWER, where all IMM values of -1 are being
converted to 0 implicitly, causing a wrong LLVM IR output.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
CC: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Note this is not ideal. Since the sifm can only do source sizes upto
1024x1024 we end up using the blitter on nv4x, which is not that fast.
And on nv3x we end up using the cpu which is really slow.
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Scanout buffers on nv30 must always be non-swizzled and have special
width alignment constraints.
These constrains have been taken from the xf86-video-nouveau
src/nv_accel_common.c: nouveau_allocate_surface() function.
nouveau_allocate_surface() applies these width constraints only when a
tiled attribute is set, which it sets for all surfaces allocated via
dri, and this "tiling" is not the same as swizzling, scanout surfaces
must be linear / have a uniform_pitch or only complete garbage is shown.
This commit fixes dri3 on nv30 showing a garbled display, with dri3 the
scanout buffers are allocated by mesa, rather then by the ddx, and the
wrong stride of these buffers was causing the garbled display.
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The tiled memcpy fast paths perform a simple blit (with only a couple of
trivial pixel conversion routines) and do not accommodate PixelTransfer
operations. Therefore if any are set, fallback to the regular routines.
Note that PixelTransfer only applies to TexImage and ReadPixels, not to
GetTexImage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
If we have spilled/unspilled a register in the current instruction, avoid
emitting unspills for the same register in the same instruction or consecutive
instructions following the current one as long as they keep reading the spilled
register. This should allow us to avoid emitting costy unspills that come with
little benefit to register allocation.
v2:
- Apply the same logic when evaluating spilling costs (Curro).
v3:
- Abstract the logic that decides if a register can be reused in a function.
that can be used from both spill_reg and evaluate_spill_costs (Curro).
v4:
- Do not disallow reusing scratch_reg in predicated reads (Curro).
- Track if previous sources in the same instruction read scratch_reg (Curro).
- Return prev_inst_read_scratch_reg at the end (Curro).
- No need to explicitily skip scratch read/write opcodes in spill_reg (Curro).
- Fix the comments explaining what happens when we hit an instruction that
does not read or write scratch_reg (Curro)
- Return true early when the current or previous instructions read
scratch_reg with a compatible mask.
v5:
- Do not return true early, the loop should not be expensive anyway
and this adds more complexity (Curro).
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
We now print out the name of the message instead of its numerical
value, and label the message control and surface numbers.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
The entire VUE map is computed based on the slots_valid bitfield;
calling brw_compute_vue_map on the same bitfield will return the
same result. So we can simply compare those.
struct brw_vue_map is 136 bytes; doing a single 8-byte comparison is
much cheaper and should work just as well.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
These were only for legacy userclipping, which we no longer support
in geometry shaders.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
According to the GLSL 1.50 specification, page 76:
"The shader must also set all values in gl_ClipDistance that have been
enabled via the OpenGL API, or results are undefined."
With this patch, we only enable clip distance writes when the shader
actually writes them. We no longer force a value to be written when
clip planes are enabled in the API. This could mean the first varying
slot would be used as clip distances - I believe it should be the safe
kind of undefined behavior.
Empirically, it doesn't seem to cause a problem.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
The legacy userclip fields are only used for the vertex shader, and at
that point there's only program_string_id and the tex struct, which are
common to all keys. So there's no need for a "VUE" key base class.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
This avoids a downcast of key, which won't exist in the base class soon.
I'm not a huge fan of this patch, but given that we're currently using
inheritance, this seems like the "right" way to do it. The alternative
is to make key a void pointer in the parent class and continue
downcasting.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
I'm about to remove the base class for VS/GS/HS/DS program keys, at
which point we won't be able to use key->tex anymore. Instead, we'll
need to store a direct pointer (like we do in the FS backend).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
This is now only used for the vertex shader, so it makes sense to get it
out of any paths run by the geometry shader.
Instead of passing the gl_clip_plane array into the run() method (which
is shared among all subclasses), we add it as a vec4_vs_visitor
constructor parameter. This eliminates the bogus NULL parameter in the
GS case.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
There are two uses of this flag.
The primary use is checking whether we need to emit code to convert
legacy gl_ClipVertex/gl_Position clipping to clip distances. In this
case, we also have to upload the clip planes as uniforms, which means
setting nr_userclip_plane_consts to a positive value. Checking if it's
> 0 works for detecting this case.
Gen4-5 also wants to know whether we're doing clipping at all, so it can
emit user clip flags. Checking if output_reg[VARYING_SLOT_CLIP_DIST0]
is set to a real register suffices for this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
We only support geometry shaders in core profiles, where gl_ClipVertex
doesn't exist. Presumably the even older behavior of clipping to
gl_Position isn't supported either. In fact, GLSL 1.50 page 76 claims:
"The shader must also set all values in gl_ClipDistance that have been
enabled via the OpenGL API, or results are undefined."
So we don't need to handle legacy clipping in geometry shaders. I think
Paul added this back when we were considering supporting the old
GL_ARB_geometry_shader4 extension.
This removes a non-orthagonal state dependency on GS compilation.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
This living in brw_fs.{h,cpp} is a historical artifact of us supporting
texturing for fragment shaders before any other stages. It's kind of
awkward given that we use it for all stages.
This avoids having to include brw_fs.h in geometry shader code in order
to access this function.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Patch modifies existing shader source and replace functionality to work
with environment variables rather than enable dumping on compile time.
Also instead of _mesa_str_checksum, _mesa_sha1_compute is used to avoid
collisions.
Functionality is controlled via two environment variables:
MESA_SHADER_DUMP_PATH - path where shader sources are dumped
MESA_SHADER_READ_PATH - path where replacement shaders are read
v2: cleanups, add strerror if fopen fails, put all functionality
inside HAVE_SHA1 since sha1 is required
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Suggested-by: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
commit 472ef9a02f introduced code to
change the types of SEL and MOV instructions for moves that simply
"copy bits around". It didn't account for type conversion moves,
however. So it would happily turn this:
mov(8) vgrf6:D, -vgrf5:D
mov(8) vgrf7:F, vgrf6:UD
into this:
mov(8) vgrf6:D, -vgrf5:D
mov(8) vgrf7:D, -vgrf5:D
which erroneously drops the conversion to float.
Cc: "11.0 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Since we switched away from calling brwCreateContext() there's a bit of
hacky support we can now delete. This reduces our diff to upstream master.
Signed-off-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
As far as I can tell, the behavior is preserved from the previous generations.
Before we set a single bit to tell the FS whether or not we'll be using an input
coverage mask. Now we have some options which are implementing various
extensions. These bits are used for the various conservative rasterization
mechanisms (for collision detection, binning, and whatever else).
I believe that the behavior is preserved because the problem which conservative
rasterization is attempting to fix would go away with the "NORMAL" mode (at the
cost of performance, I believe).
This patch serves as documentation of the change by creating the enums, as well
as giving some of the history with the links here so that the next person who
comes along and looks at it doesn't spend as long as I had to in order to
determine if there is an issue or not.
Previously, this algorithm had been done in software, and this can still be used
as long as we don't export an extension stating otherwise.
References: https://www.opengl.org/registry/specs/NV/conservative_raster.txt
References: https://http.developer.nvidia.com/GPUGems2/gpugems2_chapter42.html
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We used to always just do a one-level fallback from genX_* to anv_*
entry points. That worked for gen7 and gen8 where all entry points were
either different or could be made anv_* entry points (eg
anv_CreateDynamicViewportState). We're about to add gen9 and now need to
be able to fall back to gen8 entry points for most things.
Signed-off-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
We'll change the dispatch mechanism again in a later commit. Stop using
the driver_layer function pointers and just use the public entry points.
Signed-off-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
Print out file and line number and translate the error code to the
symbolic name.
Signed-off-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
This must be done before exporting a buffer as dmabuf fds, because
we lose track of who is using it and can't trust the reference counter.
Cc: 11.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Jason Ekstrand