The Vulkan spec says:
"VK_PIPELINE_CREATE_FAIL_ON_PIPELINE_COMPILE_REQUIRED_BIT specifies
that pipeline creation will fail if a compile is required for
creation of a valid VkPipeline object; VK_PIPELINE_COMPILE_REQUIRED
will be returned by pipeline creation, and the VkPipeline will be
set to VK_NULL_HANDLE."
Given the implementation is expected to set the pipeline to
VK_NULL_HANDLE, it's unecessary to handle pipeline feedback.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20943>
"If this texture instruction has a nir_tex_src_texture_offset source,
then the texture index is given by texture_index + texture_offset."
This fixes the failures for:
spec@arb_arrays_of_arrays@execution@sampler@fs-nested-struct-arrays-nonconst-nested-array
spec@arb_gl_spirv@execution@uniform@sampler2d-nonconst-nested-array
Signed-off-by: Amber Amber <amber@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20954>
list_is_linked() isn't the right function to use in order to check if
the BO is on a cache bucket or the zombie list, as this checks if the
next pointer of the list isn't NULL. This is always the case with the
BO list item as it's always initialized, so the next pointer points to
the list head itself when the BO isn't on any list.
Use list_is_empty() to check if the BO is actually linked into one
of the deferred destroy lists.
Fixes: 1b1f8592c0 ("etnaviv: drm: properly handle reviving BOs via a lookup")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20940>
Fixes 3DMark Wild Lands. Otherwise, we'd end up loading a DXIL shader
that had invalid linkage with another shader in the pipeline. We can
only load a DXIL shader if it's being linked against the same before
and after as a previous compilation.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20962>
The anv_execbuf_add_bo() function already sets the offsets for the
exec_objects. Since we're always using softpin and never using
relocations all these objects should have non-changing offsets, all
set during anv_bo creation and never changed. Not only we should not
change these offsets, we definitely don't change them between
anv_execbuf_add_bo() and this loop we're removing.
Previously, we'd have the offset set as -1 for BOs that had never been
submitted when we were not using softpin.
Notice that with games we can have several hundreds of BOs in this
array.
This loop was added by:
c5f7e1f5b4 ("anv: Delete relocation support from batch submission")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20885>
This is a simple helper for minimizing the storage requirements of
control streams. It discards all information required only while
building the control stream and returns just the status and the list of
BOs backing the control stream. The first BO in the list is the start
of the control stream.
Especially for small, deterministically sized control streams, there's
no sense in lugging around an entire builder structure once it's built.
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20932>
This game seems to incorrectly set the render area and since we switched
to full dynamic rendering, the framebuffer dimensions is no longer used.
Forcing the render area to be the framebuffer dimensions restore the
previous logic and it fixes rendering issues.
Fixes: c7d0d328d5 ("radv: Set the window scissor to the render area, not framebuffer")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20900>
Check the need for emitting prefetch before calling si_emit_cache_flush
to mask a possible cache miss delay and always inline radv_emit_prefetch_L2.
Either change alone is not significant but together they increase
drawcall throughput by 8% on i5-2500.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20877>
The JIT generated FS shader has logic to obey sample mask when:
multisample is enabled, or multisample is disabled but FS writes sample
mask and pipe_rasterizer_state::no_ms_sample_mask_out.
However it did not handle the case where multisample was disabled, FS
did not write sample_mask, and sample mask was zero. Instead it relied
upon the setup to discard the primitives, but that went away with commit
da5840f3.
We could restore the discard on zero mask behavior, but we would again
blurring the semantics of rasterization discard. Instead this change
adds logic to primitive setup to cull the primitives when sample mask is
zero.
Fixes: da5840f3 ("llvmpipe: Faithfully honour pipe_rasterizer_state::rasterizer_discard flag")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20934>
The Meson docs points out that it's better to use the files() function
when referring to files in the source tree than manually constructing
paths like this. Let's follow that advice, and get some neat cleanups.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20907>
The meson.build_root() method has been deprecated, so let's switch to
meson.project_build_root(), which usually means the same thing. The case
where it doesn't do the same thing is if Mesa is a subproject to some
other project, but in that case I believe we want the build root of Mesa,
not of the parent project anyway.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20907>
RRGetScreenInfo re-probes connector status, which may result in an EDID
transfer for every output, which according to Adam Jackson can be on the
order of 100ms for a single EDID block. So our previous implementation
of this eglGetMscRateANGLE was blocking for excessive periods of time
instead of being a quick query of the refresh rate like users expect.
This changes our eglGetMscRateANGLE implementation from using
RRGetScreenInfo to RRGetScreenResourcesCurrent and RRGetCrtcInfo.
This obtains the same monitor info without re-probing connectors.
Fixes a severe performance regression in Chromium WebGL performance.
While we're re-implementing the extension, we also implement proper
multi-monitor support: if there are multiple active CRTCs, we determine
which contains the largest portion of the surface, as specified in the
EGL_ANGLE_sync_control_rate extension.
We also now report fractional refresh rates correctly rather than
rounding to the nearest Hz.
Fixes: 4752655649 ("egl/x11: implement ANGLE_sync_control_rate")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6996
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7038
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20665>
Samuel Pitoiset