[Fredrik: - Remove the DummyRenderbuffer checks now that they are
done in _mesa_lookup_renderbuffer_err.
- Fix the <renderbuffertarget> name in error messages.
- Make the error message in _mesa_framebuffer_renderbuffer
reflect that <fb> might not be the bound framebuffer.
- Remove EXT suffixes from GL tokens.]
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Rename _mesa_framebuffer_renderbuffer to _mesa_FramebufferRenderbuffer_sw in
preparation for adding the ARB_direct_state_access backend function for
FramebufferRenderbuffer and NamedFramebufferRenderbuffer to share.
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
[Fredrik: Generate an error for non-existent renderbuffers]
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Some bits were already there for texture views but some were missing.
In particular for cube map views things needed to change a bit.
For simplicity I ended up removing the separate face addr bit (just use
the z bit) - cube arrays didn't use it already, so just follow the same
logic there. (In theory using separate bits could allow for better hash
function but I don't think anyone ever did some measurements of that so
probably not worth the trouble, if we'd reintroduce it we'd certainly
wanted to use the same logic for cube arrays and cube maps.)
Also extend the seamless cube sampling to cube arrays - as there were no
piglit failures before this is apparently untested, but things now generally
work quite the same for cube textures and cube array textures so there
hopefully shouldn't be any trouble...
49 new piglits, 47 pass, 2 fail (both due to fake multisampling).
v2: incorporate Brian's feedback, add sampler view validation,
function rename, formatting fixes.
Reviewed-by: Brian Paul <brianp@vmware.com>
All the functionality was pretty much there, just not tested.
Trivially fix up the missing pieces (take target info from view not
resource), and add some missing bits for cubes.
Also add some minimal debug validation to detect uninitialized target values
in the view...
49 new piglits, 47 pass, 2 fail (both related to fake multisampling,
not texture_view itself). No other piglit changes.
v2: move sampler view validation to sampler view creation, update docs.
Reviewed-by: Brian Paul <brianp@vmware.com>
This was missing, and drivers relying on the target in the view could get
into quite some trouble.
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
* No impact risk to any other platforms
* Tracing printf needs stdio.h now due to child header change
* Add missing #/src include directory for util/macros.h
This problem can easily be reproduced with a number of
ARB_shader_image_load_store piglit tests, which use a buffer object as
PBO for a pixel transfer operation and later on bind the same buffer
to the pipeline as shader image -- The problem is not exclusive to
images though, and is likely to affect other kinds of buffer objects
that can be bound to the 3D pipeline, including vertex, index,
uniform, atomic counter buffers, etc.
CC: 10.5 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
gcc 4.4.7 really doesn't like them, and they aren't standard
C++, they seem to be a gcc extension.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Now that ARB_texture_stencil8 is supported, this might happen.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Refactor ::trigger and ::abort to split out the operations that access
concurrently modified data members and require locking from the
recursive and possibly re-entrant part of these methods. This will
avoid some deadlock situations when locking is implemented.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
CC: 10.5 <mesa-stable@lists.freedesktop.org>
This fixes bugs with special cases where we have arrays of
structures containing samplers or arrays of samplers.
I've verified that patch results in calculating same index value as
returned by _mesa_get_sampler_uniform_value for IR. Patch makes
following ES3 conformance test pass:
ES3-CTS.shaders.struct.uniform.sampler_array_fragment
v2: remove unnecessary comment (Topi)
simplify changes and the overall code (Jason)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90114
Previously whenever a primitive is drawn the driver would call
_mesa_check_conditional_render which blocks waiting for the result of
the query to determine whether to render. On Gen7+ there is a bit in
the 3DPRIMITIVE command which can be used to disable the primitive
based on the value of a state bit. This state bit can be set based on
whether two registers have different values using the MI_PREDICATE
command. We can load these two registers with the pixel count values
stored in the query begin and end to implement conditional rendering
without stalling.
Unfortunately these two source registers were not in the whitelist of
available registers in the kernel driver until v3.19. This patch uses
the command parser version from intel_screen to detect whether to
attempt to set the predicate data registers.
The predicate enable bit is currently only used for drawing 3D
primitives. For blits, clears, bitmaps, copypixels and drawpixels it
still causes a stall. For most of these it would probably just work to
call the new brw_check_conditional_render function instead of
_mesa_check_conditional_render because they already work in terms of
rendering primitives. However it's a bit trickier for blits because it
can use the BLT ring or the blorp codepath. I think these operations
are less useful for conditional rendering than rendering primitives so
it might be best to leave it for a later patch.
v2: Use the command parser version to detect whether we can write to
the predicate data registers instead of trying to execute a
register load command.
v3: Simple rebase
v4: Changes suggested by Kenneth Graunke: Split the
load_64bit_register function out to a separate patch so it can be
a shared public function. Avoid calling
_mesa_check_conditional_render if we've already determined that
there's no query object. Some styling fixes.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Adds brw_load_register_mem64 which is similar to brw_load_register_mem
except that it queues two GEN7_MI_LOAD_REGISTER_MEM commands in order
to load both halves of a 64-bit register. The function is implemented
by splitting the 32-bit version into an internal helper function which
takes a size.
This will later be used to set the 64-bit predicate source registers.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In order to detect whether the predicate source registers can be used
in a later patch we will need to know the version number for the
command parser. This patch just adds a member to intel_screen and does
an ioctl to get the version.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It was possible for some events never to get triggered if one thread
was creating events and another threads was waiting for them.
This patch consolidates soft_event::wait() and hard_event::wait()
into event::wait() so that hard_event objects will now wait for
all their dependencies to be submitted before flushing the command
queue.
v2:
- Rename variables
- Use mutable varibales so we can keep event::wait() const
- Open code signalled() call so mutex can be atted to signalled
without deadlocking.
CC: 10.5 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This fixes a potential crash where on a sequence like this:
Thread 0: Check if queue is not empty.
Thread 1: Remove item from queue, making it empty.
Thread 0: Do something assuming queue is not empty.
CC: 10.5 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
No backend wires this up to anything, and the extension spec has been
marked obsolete for 4+ years.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This function is always used with EGL_WINDOW_BIT. Pixmaps are forbidden
for Wayland, and PBuffers are unimplemented.
Reviewed-by: Daniel Stone <daniels@collabora.com>.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
When the server gpu and requested gpu are different:
. They likely don't support the same tiling modes
. They likely do not have fast access to the same locations
Thus we do:
. render to a tiled buffer we do not share with the server
. Copy the content at every swap to a buffer with no tiling
that we share with the server.
This is similar to the glx dri3 DRI_PRIME implementation.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
It is possible the server advertises a render-node.
In that case no authentication is needed,
and Gem names are forbidden.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
v2: do not check for __DRI_IMAGE_DRIVER, but instead
do not advertise __DRI_DRI2_LOADER when on a render-node.
Laura Ekstrand