We were allocating enough space for the number of threads per subslice,
when we should have been allocating space for the number of threads in
the entire GPU.
Even though we currently run with a reduced thread count (due to a bug),
we might still overflow the scratch buffer because the address
calculation is based on the FFTID, which can depend on exactly which
threads, EUs, and threads are executing. We need to allocate enough
for every possible thread that could run.
Fixes rendering corruption in Synmark's Gl43CSDof on Gen8+.
Earlier platforms need additional bug fixes.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This was disabled due to occasionally incorrect behavior when trying to
upload data. It later became apparent that nvc0 also had a similar but
slightly different issue, which was resolved in commit e50c01d5. This
takes the same logic as nvc0 and applies it to nv50 (which has somewhat
different interfaces).
Unfortunately I did not note down precisely what was broken with UBOs
when removing the support from nv50, but I've tested a bunch of local
traces, and none of them appear to regress. This should hopefully
improve performance when UBOs are used, but this was not directly
verified.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This was fixed in revision 47 of the ARB_dsa spec in Oct 22, 2015. Since
it's horrible to have differing APIs across library versions, we should
attempt to minimize the impact by backporting it as far as possible and
hope no one notices.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
This brings in the fixed glClearNamedFramebufferfi definition, as well
as a lot of GLsizei -> GLsizeiptr changes.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
This basically disallows all 8-bit x 3 and 16-bit x 3 formats for
textures and render targets. Some 3-component formats were already
disallowed before. This avoids problems with GL_ARB_copy_image.
v2: the previous version of this patch disallowed all 3-component formats
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Mesa and gallium don't have a complete set of matching 3-component
texture formats. For example, 8-bit sRGB unorm. To fully support
the GL_ARB_copy_image extension we need to have support for all of
these formats: RGB8_UNORM, RGB8_SNORM, RGB8_SRGB, RGB8_UINT, and
RGB8_SINT using the same component order. Since we don't have that,
disable the 3-component formats for now.
v2: Simplify 3-component format check, per Marek.
Also check that target != PIPE_BUFFER.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
1. Try to choose R8G8B8A8 unorm/srgb formats before others in an
effort to try to match component ordering for UINT/SINT/etc.
2. If we can't get a format such as PIPE_FORMAT_A16_UNORM, try
PIPE_FORMAT_R16G16B16A16_UNORM before shallower formats.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
>From OpenGL 4.0 spec, section 4.3.2 "Copying Pixels":
"The pixels corresponding to these buffers are copied from the source
rectangle bounded by the locations (srcX0, srcY 0) and (srcX1, srcY 1)
to the destination rectangle bounded by the locations (dstX0, dstY 0)
and (dstX1, dstY 1). The lower bounds of the rectangle are inclusive,
while the upper bounds are exclusive."
So, the rectangles sharing just an edge shouldn't overlap.
-----------
| |
------- ---
| | |
| | |
------- ---
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
>From OpenGL 4.0 spec, section 4.3.2 "Copying Pixels":
"The pixels corresponding to these buffers are copied from the source
rectangle bounded by the locations (srcX0, srcY 0) and (srcX1, srcY 1)
to the destination rectangle bounded by the locations (dstX0, dstY 0)
and (dstX1, dstY 1). The lower bounds of the rectangle are inclusive,
while the upper bounds are exclusive."
So, the rectangles sharing just an edge shouldn't overlap.
-----------
| |
------- ---
| | |
| | |
------- ---
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This converts to testing for 64-bit types and renames some things
in anticipation of 64-bit integer support.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just makes some generic code that currently emits double
suitable for emitting 64-bit values.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently this just doubles, but we'll convert users to this
so making adding 64-bit integers easier.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reworks the #if guards a bit. When Emil originally wrote them, he
just guarded everything. However, part of what anv_entrypoints_gen.py
generates is a hash table for looking up entrypoints based on their name.
This table *cannot* get out of sync between C and python regardless of
preprocessor flags. In order to prevent this, this commit makes us use
void pointers in the dispatch table for those entrypoints which aren't
available. This means that the dispatch table size and entry order is
constant and it should never get out-of-sync with the python.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
When an applications specifies mip levels _before_ setting a mipmap texture
filter, we will initially guess a single texture level. When the second level
image is created, we try to allocate the full texture -- however, we get the
base level size guess wrong if that size is odd. This leads to yet another
re-allocation of the texture later during st_finalize_texture.
Even worse, this re-allocation breaks a (reasonable) assumption made by
st_generate_mipmaps, because the re-allocation in the finalization call will
again allocate a single-level pipe texture (based on the non-mipmap texture
filter!). As a result, mipmap generation fails in interesting ways.
All of this can be avoided by just using the fact that we already know the
size of the base level.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95529
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
At this point, the limits are probably more-or-less correct. If there is
an invalid limit, that's a bug not a FINSHME.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
This way the the bind map (which we're caching) is mostly independent of
the pipeline layout. The only coupling remaining is that we pull the array
size of a binding out of the layout. However, that size is also specified
in the shader and should always match so it's not really coupled. This
rendering issues in Dota 2.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Since applications are allowed to specify some set of bindings which need
not be dense they also need not be in order. For most things, this doesn't
matter, but it could result getting the wrong dynamic offsets. This adds a
quick-and-dirty sort to ensure that everything is always in increasing
order of binding index.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
With glx of gstreamer-vaapi, the temporary pixmap for front buffer gets
renewed in each frame, so when we receive a new pixmap, should get a new
front buffer for it.
This also fixes Totem player playback corruption.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
From original commit, the macro "if HAVE_DRI3" was in Makefile.sources,
this file is shared with SCons, SCons is not able to parse this marco,
the SCons build failed. Jose quickly gave two approaches and quick fix
with his second approach, thanks Jose for the solutions and fixes.
This patch is Jose's first approach, and it's more proper, because the
dri3 c file should not be included to build when DRI3 is not enabled.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Besides the old JIT bug, it seems the X86 backend on LLVM 3.3 doesn't
handle llvm.fmuladd and instead it fall backs to a C function. Which in
turn causes a segfault on Windows.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
As suggested by Roland Scheidegger.
Use the same logic as f16c, since fma requires VEX encoding.
But disable FMA on LLVM 3.3 without MCJIT.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This fixes a problem with the CE preamble and restoring only stuff in the
preamble when needed.
To illustrate suppose we have two graphics IB's 1 and 2, which are submitted in
that order. Furthermore suppose IB 1 does not use CE ram, but IB 2 does, and we
have a context switch at the start of IB 1, but not between IB 1 and IB 2.
The old code put the CE RAM loads in the preamble of IB 2. As the preamble of
IB 1 does not have the loads and the preamble of IB 2 does not get executed, the
old values are not load into CE RAM.
Fix this by always restoring the entire CE RAM.
v2: - Just load all descriptor set buffers instead of load and store the entire
CE RAM.
- Leave the ce_ram_dirty tracking in place for the non-preamble case.
v3: - Fixed parameter alignment.
- Rebased to master (Nicolai's descriptor series).
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The reality is that this doesn't matter, because we manually emit the
ARL to the sampler reladdr, and those arguments don't get an extra load
later, so it's effectively just a boolean. However having the types be
wrong is confusing and could trigger very odd bugs should usage change
down the line.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>
Adding 64-bit integers support was going to make this file worse,
just remove the tabs from it now.
Acked-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
An update in graphics specs has deleted the halign and valign fields
from XY_FAST_COPY_BLT command. See mesa commit 97f0f91.
Cc: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
The extension is already advertised in compatibility profile, but
the _mesa_has_compute_shaders only returns true in core profile.
If we advertise it, we should allow it to work.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
v2: only load the clip vertex once
v3: fix clip enable logic, add cullDistance
v4: remove duplicate fields in vs jit key, fix test of clip fixup needed
v5: fix clipdistance linkage for slot!=0,4
v6: support clip+cull; passes most piglit clip (failures understood)
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
GLX documentation states:
glXCreateNewContext can generate the following errors: (...)
GLXBadFBConfig if config is not a valid GLXFBConfig
Function checks if the given config is a valid config and sets proper
error code.
Fixes currently crashing glx-fbconfig-bad Piglit test.
v2: coding style cleanups (Emil, Topi)
use DefaultScreen macro (Emil)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "11.2" <mesa-stable@lists.freedesktop.org>
Apply the luma key filter to the YCbCr values during the CSC conversion
in video buffer shader. The initial values of max and min luma are set
to opposite values to disable the filter initially and will be set when
enabling it.
Add extra parmeters min and max luma for the luma key filter in
vl_compositor_set_csc_matrix in va, xvmc. Setting them
to opposite value 1.f and 0.f respectively won't effect the CSC
conversion
v2: -Squash 1,2 and 3 into one patch to avoid breaking build of
other components. (Christian)
-use ureg_swizzle. (Christian)
-change name of the variables. (Christian)
v3: -Squash all patches in one to avoid breaking of build. (Emil)
-wrap functions properly. (Emil)
-use 0.0f and 1.0f instead of 0.f and 1.f respectively. (Emil)
v4: -Divide it in two patches one which introduces the functionality
and assigs dummy values to the changed functions and second which
implements the lumakey filter. (Christian)
-use ureg_scalar instead ureg_swizzle. (Christian)
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
When Kristian implemented GL_TEXTURE_EXTERNAL_OES, he hooked it up for gen8
but not for gen7 or earlier. It all works, we just need to emit the states
for the extra planes.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
When calling virgl_fence_wait() with timeout=0,
virgl_{drm,vtest}_resource_is_busy() is called. However, it returns TRUE
for a busy resource, whereace virgl_fence_wait() should return TRUE for
a completed (non-busy) resource.
This fixes running supertuxkart in a VM (I could not reproduce locally
with vtest though there is a similar fix)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In the future int64 support will have the same requirements.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Kenneth Graunke