f9bc48d41d
ARM SoCs usually have their DRM/KMS devices on the platform bus, so add support for this bus in order to allow use of the DRI_PRIME environment variable with those devices. While at it, also support the host1x bus, which is effectively the same but uses an additional layer in the bus hierarchy. Note that it isn't enough to support the bus that has the rendering GPU because the loader code will also try to construct an ID path tag for a scanout-only device if it is the default that is being opened. The ID path tag for a device can be obtained by running udevadm info on the device node, as shown in this example on NVIDIA Tegra: $ udevadm info /dev/dri/card0 | grep ID_PATH_TAG E: ID_PATH_TAG=platform-50000000_host1x The corresponding OF_FULLNAME property, from which the ID_PATH_TAG is constructed, can be found in the sysfs "uevent" attribute for the card0 device's parent: $ grep OF_FULLNAME /sys/devices/platform/50000000.host1x/drm/uevent OF_FULLNAME=/host1x@50000000 Similarily, /dev/dri/card1 corresponds to the GPU: $ udevadm info /dev/dri/card1 | grep ID_PATH_TAG E: ID_PATH_TAG=platform-57000000_gpu and: $ grep OF_FULLNAME /sys/devices/platform/57000000.gpu/uevent OF_FULLNAME=/gpu@57000000 Changes in v2: - avoid confusing pre-increment in strdup() - add examples of tags to commit message Reviewed-by: Eric Engestrom <eric@engestrom.ch> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
File: docs/README.WIN32 Last updated: 21 June 2013 Quick Start ----- ----- Windows drivers are build with SCons. Makefiles or Visual Studio projects are no longer shipped or supported. Run scons libgl-gdi to build gallium based GDI driver. This will work both with MSVS or Mingw. Windows Drivers ------- ------- At this time, only the gallium GDI driver is known to work. Source code also exists in the tree for other drivers in src/mesa/drivers/windows, but the status of this code is unknown. Recipe ------ Building on windows requires several open-source packages. These are steps that work as of this writing. - install python 2.7 - install scons (latest) - install mingw, flex, and bison - install pywin32 from here: http://www.lfd.uci.edu/~gohlke/pythonlibs get pywin32-218.4.win-amd64-py2.7.exe - install git - download mesa from git see https://www.mesa3d.org/repository.html - run scons General ------- After building, you can copy the above DLL files to a place in your PATH such as $SystemRoot/SYSTEM32. If you don't like putting things in a system directory, place them in the same directory as the executable(s). Be careful about accidentially overwriting files of the same name in the SYSTEM32 directory. The DLL files are built so that the external entry points use the stdcall calling convention. Static LIB files are not built. The LIB files that are built with are the linker import files associated with the DLL files. The si-glu sources are used to build the GLU libs. This was done mainly to get the better tessellator code. If you have a Windows-related build problem or question, please post to the mesa-dev or mesa-users list.