Danylo Piliaiev
c8abe03f3b
From "Alpha Coverage" section of SKL PRM Volume 7:
"If Pixel Shader outputs oMask, AlphaToCoverage is disabled in
hardware, regardless of the state setting for this feature."
From OpenGL spec 4.6, "15.2 Shader Execution":
"The built-in integer array gl_SampleMask can be used to change
the sample coverage for a fragment from within the shader."
From OpenGL spec 4.6, "17.3.1 Alpha To Coverage":
"If SAMPLE_ALPHA_TO_COVERAGE is enabled, a temporary coverage value
is generated where each bit is determined by the alpha value at the
corresponding sample location. The temporary coverage value is then
ANDed with the fragment coverage value to generate a new fragment
coverage value."
Similar wording could be found in Vulkan spec 1.1.100
"25.6. Multisample Coverage"
Thus we need to compute alpha to coverage dithering manually in shader
and replace sample mask store with the bitwise-AND of sample mask and
alpha to coverage dithering.
The following formula is used to compute final sample mask:
m = int(16.0 * clamp(src0_alpha, 0.0, 1.0))
dither_mask = 0x1111 * ((0xfea80 >> (m & ~3)) & 0xf) |
0x0808 * (m & 2) | 0x0100 * (m & 1)
sample_mask = sample_mask & dither_mask
Credits to Francisco Jerez <currojerez@riseup.net> for creating it.
It gives a number of ones proportional to the alpha for 2, 4, 8 or 16
least significant bits of the result.
GEN6 hardware does not have issue with simultaneous usage of sample mask
and alpha to coverage however due to the wrong sending order of oMask
and src0_alpha it is still affected by it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109743
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
`Mesa <https://mesa3d.org>`_ - The 3D Graphics Library ====================================================== Source ------ This repository lives at https://gitlab.freedesktop.org/mesa/mesa. Other repositories are likely forks, and code found there is not supported. Build & install --------------- You can find more information in our documentation (`docs/install.html <https://mesa3d.org/install.html>`_), but the recommended way is to use Meson (`docs/meson.html <https://mesa3d.org/meson.html>`_): .. code-block:: sh $ mkdir build $ cd build $ meson .. $ sudo ninja install Support ------- Many Mesa devs hang on IRC; if you're not sure which channel is appropriate, you should ask your question on `Freenode's #dri-devel <irc://chat.freenode.net#dri-devel>`_, someone will redirect you if necessary. Remember that not everyone is in the same timezone as you, so it might take a while before someone qualified sees your question. To figure out who you're talking to, or which nick to ping for your question, check out `Who's Who on IRC <https://dri.freedesktop.org/wiki/WhosWho/>`_. The next best option is to ask your question in an email to the mailing lists: `mesa-dev\@lists.freedesktop.org <https://lists.freedesktop.org/mailman/listinfo/mesa-dev>`_ Bug reports ----------- If you think something isn't working properly, please file a bug report (`docs/bugs.html <https://mesa3d.org/bugs.html>`_). Contributing ------------ Contributions are welcome, and step-by-step instructions can be found in our documentation (`docs/submittingpatches.html <https://mesa3d.org/submittingpatches.html>`_). Note that Mesa uses email mailing-lists for patches submission, review and discussions.