38807ceeae
On Gfx4 and Gfx5, sel.l (for min) and sel.ge (for max) are implemented
using a separte cmpn and sel instruction. This lowering occurs in
fs_vistor::lower_minmax which is called very, very late... a long, long
time after the first calls to opt_cmod_propagation. As a result,
conditional modifiers can be incorrectly propagated across sel.cond on
those platforms.
No tests were affected by this change, and I find that quite shocking.
After just changing flags_written(), all of the atan tests started
failing on ILK. That required the change in cmod_propagatin (and the
addition of the prop_across_into_sel_gfx5 unit test).
Shader-db results for ILK and GM45 are below. I looked at a couple
before and after shaders... and every case that I looked at had
experienced incorrect cmod propagation. This affected a LOT of apps!
Euro Truck Simulator 2, The Talos Principle, Serious Sam 3, Sanctum 2,
Gang Beasts, and on and on... :(
I discovered this bug while working on a couple new optimization
passes. One of the passes attempts to remove condition modifiers that
are never used. The pass made no progress except on ILK and GM45.
After investigating a couple of the affected shaders, I noticed that
the code in those shaders looked wrong... investigation led to this
cause.
v2: Trivial changes in the unit tests.
v3: Fix type in comment in unit tests. Noticed by Jason and Priit.
v4: Tweak handling of BRW_OPCODE_SEL special case. Suggested by Jason.
Fixes: df1aec763e ("i965/fs: Define methods to calculate the flag subset read or written by an fs_inst.")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Dave Airlie <airlied@redhat.com>
Iron Lake
total instructions in shared programs: 8180493 -> 8181781 (0.02%)
instructions in affected programs: 541796 -> 543084 (0.24%)
helped: 28
HURT: 1158
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.35% max: 0.86% x̄: 0.53% x̃: 0.50%
HURT stats (abs) min: 1 max: 3 x̄: 1.14 x̃: 1
HURT stats (rel) min: 0.12% max: 4.00% x̄: 0.37% x̃: 0.23%
95% mean confidence interval for instructions value: 1.06 1.11
95% mean confidence interval for instructions %-change: 0.31% 0.38%
Instructions are HURT.
total cycles in shared programs: 239420470 -> 239421690 (<.01%)
cycles in affected programs: 2925992 -> 2927212 (0.04%)
helped: 49
HURT: 157
helped stats (abs) min: 2 max: 284 x̄: 62.69 x̃: 70
helped stats (rel) min: 0.04% max: 6.20% x̄: 1.68% x̃: 1.96%
HURT stats (abs) min: 2 max: 48 x̄: 27.34 x̃: 24
HURT stats (rel) min: 0.02% max: 2.91% x̄: 0.31% x̃: 0.20%
95% mean confidence interval for cycles value: -0.80 12.64
95% mean confidence interval for cycles %-change: -0.31% <.01%
Inconclusive result (value mean confidence interval includes 0).
GM45
total instructions in shared programs: 4985517 -> 4986207 (0.01%)
instructions in affected programs: 306935 -> 307625 (0.22%)
helped: 14
HURT: 625
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.35% max: 0.82% x̄: 0.52% x̃: 0.49%
HURT stats (abs) min: 1 max: 3 x̄: 1.13 x̃: 1
HURT stats (rel) min: 0.12% max: 3.90% x̄: 0.34% x̃: 0.22%
95% mean confidence interval for instructions value: 1.04 1.12
95% mean confidence interval for instructions %-change: 0.29% 0.36%
Instructions are HURT.
total cycles in shared programs: 153827268 -> 153828052 (<.01%)
cycles in affected programs: 1669290 -> 1670074 (0.05%)
helped: 24
HURT: 84
helped stats (abs) min: 2 max: 232 x̄: 64.33 x̃: 67
helped stats (rel) min: 0.04% max: 4.62% x̄: 1.60% x̃: 1.94%
HURT stats (abs) min: 2 max: 48 x̄: 27.71 x̃: 24
HURT stats (rel) min: 0.02% max: 2.66% x̄: 0.34% x̃: 0.14%
95% mean confidence interval for cycles value: -1.94 16.46
95% mean confidence interval for cycles %-change: -0.29% 0.11%
Inconclusive result (value mean confidence interval includes 0).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12191>
`Mesa <https://mesa3d.org>`_ - The 3D Graphics Library ====================================================== Source ------ This repository lives at https://gitlab.freedesktop.org/mesa/mesa. Other repositories are likely forks, and code found there is not supported. Build & install --------------- You can find more information in our documentation (`docs/install.rst <https://mesa3d.org/install.html>`_), but the recommended way is to use Meson (`docs/meson.rst <https://mesa3d.org/meson.html>`_): .. code-block:: sh $ mkdir build $ cd build $ meson .. $ sudo ninja install Support ------- Many Mesa devs hang on IRC; if you're not sure which channel is appropriate, you should ask your question on `OFTC's #dri-devel <irc://irc.oftc.net/dri-devel>`_, someone will redirect you if necessary. Remember that not everyone is in the same timezone as you, so it might take a while before someone qualified sees your question. To figure out who you're talking to, or which nick to ping for your question, check out `Who's Who on IRC <https://dri.freedesktop.org/wiki/WhosWho/>`_. The next best option is to ask your question in an email to the mailing lists: `mesa-dev\@lists.freedesktop.org <https://lists.freedesktop.org/mailman/listinfo/mesa-dev>`_ Bug reports ----------- If you think something isn't working properly, please file a bug report (`docs/bugs.rst <https://mesa3d.org/bugs.html>`_). Contributing ------------ Contributions are welcome, and step-by-step instructions can be found in our documentation (`docs/submittingpatches.rst <https://mesa3d.org/submittingpatches.html>`_). Note that Mesa uses gitlab for patches submission, review and discussions.