This is a helper that will be shared between the new control flow
insertion and modification code.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For now, it allows us to refactor the control flow insertion API's so
that there's a single entrypoint (with some wrappers). More importantly,
it will allow us to reduce the combinatorial explosion in the extract
function. There, we need to specify two points to extract, which may be
at the beginning of a block, the end of a block, or in the middle of a
block. And then there are various wrappers based off of that (before a
control flow node, before a control flow list, etc.). Rather than having
9 different functions, we can have one function and push the actual
logic of determining which variant to use down to the split function,
which will be shared with nir_cf_node_insert().
In the future, we may want to make the instruction insertion API's as
well as the builder use this, but that's a future cleanup.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When we insert a single basic block A into another basic block B, we
will split B into C and D, insert A in the middle, and then splice
together C, A, and D. When we splice together C and A, we need to move
the successors of A into C -- except A has no successors, since it
hasn't been inserted yet. So in move_successors(), we need to handle the
case where the block whose successors are to be moved doesn't have any
successors. Fixing link_blocks() here prevents a segfault and makes it
work correctly.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We may delete a control flow node which contains structured jumps to
other parts of the program. We need to remove the jump as a predecessor,
as well as remove any phi node sources which reference it. Right now,
the same problem exists for blocks that don't end in a jump instruction,
but with the new API it shouldn't be an issue, since blocks that don't
end in a jump must either point to another block in the same extracted
CF list or not point to anything at all.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Unlike calling nir_instr_remove(), calling nir_cf_node_remove() (and
later in the series, the nir_cf_list_delete()) implies that you're
removing instructions that may still have uses, except those
instructions are never executed so any uses will be undefined. When
cleaning up a CF node for deletion, we must clean up any uses of the
deleted instructions by making them point to undef instructions instead.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In particular, handle the case where the earlier block ends in a jump
and the later block is empty. In that case, we want to preserve the jump
and remove any traces of the later block. Before, we would only hit this
case when removing a control flow node after a jump, which wasn't a
common occurance, but we'll need it to handle inserting a control flow
list which ends in a jump, which should be more common/useful.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Before, we would only split a block with a jump at the end if we were
inserting something after a block with a jump, which never happened in
practice. But now, we want to use this to extract control flow lists
which may end in a jump, in which case we really need to do the correct
patching up. As a side effect, when removing jumps we now correctly
insert undef phi sources in some corner cases, which can't hurt.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Before, the process of removing a jump and wiring up the remaining block
correctly was atomic, but with the new control flow modification it's
split into two parts: first, we extract the jump, which creates a new
block with re-wired successors as well as a free-floating jump, and then
we delete the control flow containing the jump, which removes the entry
in the predecessors and any phi node sources. Split up
nir_handle_remove_jumps() to accomodate this, and add the missing
support for removing phi node sources.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We want to start reworking and expanding this code, but it'll be a lot
easier to do once we disentangle it from the rest of the stuff in nir.c.
Unfortunately, there are a few unavoidable dependencies in nir.c on
methods we'd rather not expose publicly, since if not used in very
specific situations they can cause Bad Things (tm) to happen. Namely, we
need to do some magical control flow munging when adding/removing jumps.
In the future, we may disallow adding/removing jumps in
nir_instr_insert_*() and nir_instr_remove(), and use separate functions
that are part of the control flow modification code, but for now we
expose them and put them in a separate, private header.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
cleanup_cf_node() is part of the control flow modification code, which
we're going to split into its own file, but remove_defs_uses() is an
internal function used by nir_instr_remove(). Break the dependency by
making cleanup_cf_node() use nir_instr_remove() instead, which simply
calls remove_defs_uses() and then removes the instruction from the list.
nir_instr_remove() does do extra things for jumps, though, so we avoid
calling it on jumps which matches the previous behavior (this will be
fixed later in the series).
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It was being used to initialize function impls and loops, even though
it's really a control flow modification helper. It's pretty trivial, so
just inline it to avoid the dependency.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It's simply the first nir_cf_node in the nir_function_impl::body list,
which is easy enough to access - we don't to store a pointer to it
explicitly. Removing it means we don't need to maintain the pointer
when, say, splitting the start block when modifying control flow.
Thanks to Connor Abbott for suggesting this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This got missed because the piglit test only tested int images to avoid a
combinatiorial explosion of format, targets, stages and sizes which
takes more than 5 minutes to test on nvidia's driver.
This patch also drops the IMAGE_FUNCTION_AVAIL_ATOMIC which is not applicable
to the image_size codepath but was not hurting in any way.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
The constant folding pass can take a long time to complete
so rather than running through the entire pass each time
a new constant is propagated (and vice versa) interleave them.
This change helps ES31-CTS.arrays_of_arrays.InteractionFunctionCalls1
go from around 2 min -> 23 sec.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
See issue from the ARB_texture_query_lod spec for LOD vs Lod confusion:
(3) The core specification uses the "Lod" spelling, not "LOD". Should
this extension be modified to use "Lod"?
RESOLVED: The "Lod" spelling is the correct spelling for the core
specification and the preferred spelling for use. However, use of
"LOD" also exists, as the extension predated the core specification,
so this extension won't remove use of "LOD".
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
v2, review from Francisco Jerez:
- make the destination variable as large as what the nir instrinsic
defines (4) instead of the size of the return variable of glsl. This
is still safe for the already existing code because all the intrinsics
affected returned the same amount of components as expected by glsl IR.
In the case of image_size, it is not possible to do so because the
returned number of component depends on the image type and this case
is not well handled by nir.
v3:
- Style fix
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
The code is heavily inspired from Francisco Jerez's code supporting the
image_load_store extension.
Backends willing to support this builtin should handle
__intrinsic_image_size.
v2: Based on the review of Ilia Mirkin
- Enable the extension for GLES 3.1
- Fix indentation
- Fix the return type (float to int, number of components for CubeImages)
- Add a warning related to GLES 3.1
v3: Based on the review of Francisco Jerez
- Refactor the code to share both add_image_function and _image with the other
image-related functions
v4: Based on Topi Pohjolainen's comments
- Do not add parenthesis for the return value
v5: based on Francisco Jerez's comments:
- Fix a few indent issues
- Reduce the size of a condition by testing the dimension and array properties
instead of enumerating all the formats.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This includes the minimum required desktop/ES GLSL version in the
format qualifier table in anticipation of new GLSL versions extending
the set of supported image formats. According to section 4.4.7 of the
GLSL ES 3.1 spec:
"The format layout qualifier identifiers for image variable
declarations are:
[...]
rgba32f
rgba16f
r32f
rgba8
rgba8_snorm
[...]
rgba32i
rgba16i
rgba8i
r32i
[...]
rgba32ui
rgba16ui
rgba8ui
r32ui"
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
These seem to have been re-added at some point during the
ARB_tessellation_shader implementation work. AFAICT the second
(correct) definition of each constant would have had no effect because
the symbols were already defined.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
These are a subset of the image types supported by desktop GL,
excluding 1D, 1D array, rectangle, buffer, cube array, 2D MS and 2D
MS array texture targets.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
From the GLSL ES 3.1 spec, section 4.7.3:
"Any floating point, integer, opaque type declaration can have the
type preceded by one of these precision qualifiers: [...] highp
[...], mediump [...], lowp [...]."
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Note that this is slightly more permissive than the spec language
requires: "Any image variable must specify a format layout qualifier."
The GLSL ES spec seems really sketchy regarding format layout
qualifiers on function formal parameters -- On the one hand they are
required, but on the other hand it doesn't provide any syntax to
specify them (see section 6.1.1), they don't participate in parameter
type matching for overload resolution, and are in fact explictly
forbidden ("Layout qualifiers cannot be used on formal function
parameters"). Of course none of the image built-in functions defined
by the spec specify format layout qualifiers (and they probably
couldn't sensibly), to contradict its own requirement.
This probably qualifies for a spec bug, but in the meantime do the
sensible thing and require layout qualifiers on uniforms *only*.
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Support for binding an image to an image unit explicitly in the shader
source is required by both GLSL 4.2 and GLSL ES 3.1, but not by the
original ARB_shader_image_load_store extension.
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
The name of both the GLSL built-in variable and the glGetInteger param
with the same value changed in GLSL ES 3.1 and GL 4.5. Its semantics
also changed slightly, since the limit now also takes into account the
number of SSBs in use. Switch our internal data structures to the
up-to-date name.
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GL_ARB_compute_shader is limited for GLSL version 430.
This enables for GLSL ES version 310.
V2: Updated error string to also include GLSL 3.10
Signed-off-by: Marta Lofstedt <marta.lofstedt@linux.intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Patch separates array samplers from the texture_multisample check so that we
can enable only [iu]sampler2DMS, [iu]sampler2DMSArray are not supported.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
They're used by glsl_to_nir.cpp, and I want to use them in TGSI-to-NIR as
well (our use of the var->index slot to store slot properties no longer
works since it got truncated).
The *_MAX defines are left in mtypes.h, because they depend on config.h.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
The positive and negative value of a float can only
be equal to each other if it is -0.0f and 0.0f.
This is safe for Nan and Inf, as -Nan != Nan, and -Inf != Inf
This gives no changes in my shader-db
Signed-off-by: Thomas Helland <thomashelland90@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
-NaN != NaN, and -Inf != Inf, so this should be safe.
Found while working on my VRP pass.
Shader-db results on my IVB:
total instructions in shared programs: 1698267 -> 1698067 (-0.01%)
instructions in affected programs: 15785 -> 15585 (-1.27%)
helped: 36
HURT: 0
GAINED: 0
LOST: 0
Some shaders was found to have the following pattern in NIR:
vec1 ssa_26 = fneg ssa_21
vec1 ssa_27 = fne ssa_21, ssa_26
Make that:
vec1 ssa_27 = fne ssa_21, 0.0f
This is found in Dota2 and Brutal Legend.
One shader is cut by 8%, from 323 -> 296 instructons in SIMD8
Signed-off-by: Thomas Helland <thomashelland90@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Connor Abbott