anv_format is supposed to have a pointer back to the associated
VkFormat, we were missed this for depth/stencil formats.
This doesn't fix anything afaict, but will be needed for future
changes.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 465de47bad ("anv: associate vulkan formats with aspects")
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Spec says :
"timestampComputeAndGraphics specifies support for timestamps on all
graphics and compute queues. If this limit is set to VK_TRUE, all
queues that advertise the VK_QUEUE_GRAPHICS_BIT or
VK_QUEUE_COMPUTE_BIT in the VkQueueFamilyProperties::queueFlags
support VkQueueFamilyProperties::timestampValidBits of at least 36."
On gen7+ this should be true (we only have 32bits of timestamp on
gen6 and below).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 802f00219a ("anv/device: Update features and limits")
Reported-by: Timothy Strelchun <timothy.strelchun@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In many cases, the compiler can just copy-prop the strided MOV whereas
the conversion is a bit trickier. This cuts 5% of the instructions off
of one particular Vulkan CTS test which does lots of load_ssbo.
Reviewed-by: Matt Turner <mattst88@gmail.com>
This fixes some validation errors generated by certain D->W conversions
but is likely not a full solution. Calculating an actual register
stride is a far more complex problem in general and should probably be
handled by the brw_fs_generator.
Reviewed-by: Matt Turner <mattst88@gmail.com>
When running on ICL the
dEQP-VK.ssbo.phys.layout.random.16bit.scalar.13 needs more than 1M for
the shader, so bump it.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Now that the 64-bit lowering passes do a complete lowering in one go, we
don't need to loop anymore. We do, however, have to ensure that int64
lowering happens after double lowering because double lowering can
produce int64 ops.
Reviewed-by: Eric Anholt <eric@anholt.net>
In 6ce8592836 we started looking at the dynamic stencil state and
disabling stencil writes when the stencil mask is zero. Unfortunately,
we never updated the PMA fix code accordingly so 3DSTATE_WM_DEPTH_STENCIL
and the PMA fix were getting out-of-sync causing hangs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109203
Fixes: 6ce8592836 "anv: Disable stencil writes when both write..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Specifically needed for nativewindow for some VK_EXT_external_memory_android_hardware_buffers
functions, where we call into some AHardwareBuffer functions.
The legacy Android ext did not have us call into any Android function
at all and hence it was not noticed.
Fixes: 755c633b8d "anv: Fix vulkan build in meson."
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
anv_render_pass_compile() turns an unused attachment into a NULL
depth_stencil_attachment pointer so check that pointer before
accessing it.
Found with updates to existing CTS tests.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 208be8eafa ("anv: Make subpass::depth_stencil_attachment a pointer")
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
When using softpin, the first allocation was not calculating the
padding and offset correctly for the case the first allocation needed
to grow. We were missing initialize the state.end right after
expanding the pool for the first time.
This is not a problem for non-softpin since there we don't use
leftover padding so the ends would re-arrange incrementally.
This fixes running dEQP-VK.ssbo.phys.layout.random.16bit.scalar.13 in
SKL -- the test uses a shader larger than the initial size for the
instruction pool.
Fixes: dfc9ab2ccd "anv/allocator: Add padding information."
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For bindless SSBO access, we have to do 64-bit address calculations. On
ICL and above, we don't have 64-bit integer support so we have to lower
the address calculations to 32-bit arithmetic. If we don't run the
optimization loop before lowering, we won't fold any of the address
chain calculations before lowering 64-bit arithmetic and they aren't
really foldable afterwards. This cuts the size of the generated code in
the compute shader in dEQP-VK.ssbo.phys.layout.random.16bit.scalar.13 by
around 30%.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
c8665005: ("intel/compiler: Don't always require precise lowering of flrp")
forgot to remove some comments that didn't apply any more after the
change.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrnd.net>
With separate stencil usage, we can't just grab the usage from the image
directly and have to consider the per-aspect usage instead.
Fixes: 1be38f9178 "anv:Use VK_EXT_separate_stencil_usage to avoid..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
A couple patches later in this series use the flag to avoid a few
thousand shader-db regresions on all vec4 platforms.
I'm not particularly enamored with the name of this flag. However, I
suspect the Intel vec4 backend is the only backend that will benefit
from it. Specifically, the cases where this helps are all cases where
we want to prevent nir_opt_algebraic from rearranging instructions to
create 3-source instructions, such as ffma and flrp, with additional
immediate value or uniform sources.
The earlier commit "intel/vec4: Try to emit a single load for multiple
3-src instruction operands" solves most of the problems caused by
additional immediate values, but the restrictions on register strides
that cause problems for uniforms and shader inputs persist.
Reviewed-by: Matt Turner <mattst88@gmail.com>
If a 3-source instruction uses immediate values 1.0 and -1.0, just load
1.0 into a register. Use the negation source modifier to get -1.0.
This has trivial impact now, but it prevents a few thousand regressions
on vec4 platforms with "nir/algebraic: Recognize open-coded flrp(-1, 1,
a) and flrp(1, -1, a)"
All Gen6 and Gen7 platforms had similar results. (Haswell shown)
total instructions in shared programs: 13487412 -> 13487406 (<.01%)
instructions in affected programs: 541 -> 535 (-1.11%)
helped: 6
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.36% max: 2.08% x̄: 1.65% x̃: 1.80%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -2.33% -0.97%
Instructions are helped.
total cycles in shared programs: 376402564 -> 376402500 (<.01%)
cycles in affected programs: 10348 -> 10284 (-0.62%)
helped: 10
HURT: 1
helped stats (abs) min: 2 max: 26 x̄: 7.00 x̃: 2
helped stats (rel) min: 0.13% max: 2.05% x̄: 0.89% x̃: 0.79%
HURT stats (abs) min: 6 max: 6 x̄: 6.00 x̃: 6
HURT stats (rel) min: 0.29% max: 0.29% x̄: 0.29% x̃: 0.29%
95% mean confidence interval for cycles value: -11.72 0.08
95% mean confidence interval for cycles %-change: -1.20% -0.36%
Inconclusive result (value mean confidence interval includes 0).
No shader-db changes on any other Intel platform.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gen11 SLM is not on L3 anymore, so now the hardware has two separate
fences. Add a way to control which fence types to use.
At this time, we don't have enough information in NIR to control the
visibility of the memory being fenced, so for now be conservative and
assume that fences will need a stall. With more information later
we'll be able to reduce those.
Fixes Vulkan CTS tests in ICL:
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_nonlocal.workgroup.guard_local.buffer.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_local.buffer.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_local.image.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.workgroup.payload_local.buffer.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.workgroup.payload_local.image.guard_nonlocal.workgroup.comp
The whole set of supported tests in dEQP-VK.memory_model.* group
should be passing in ICL now.
v2: Pass BTI around instead of having an enum. (Jason)
Emit two SHADER_OPCODE_MEMORY_FENCE instead of one that gets
transformed into two. (Jason)
List tests fixed. (Lionel)
v3: For clarity, split the decision of which fences to emit from the
emission code. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Right now, all keys have two things in common: a program string ID and a
sampler_prog_key_data. I'd like to add another thing or two and need a
place to put it. This commit adds a new brw_base_prog_key struct which
contains those two common bits.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I'm not 100% sure how this ever worked because gem_create usually shoots
you if the BO size isn't page-aligned.
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is the MOCS setting used for the A64 stateless messages which we
sometimes use for SSBO operations.
Fixes: 48ed2a7bb0 "anv: Implement VK_EXT_buffer_device_address"
Fixes: 79fb0d27f3 "anv: Implement SSBOs bindings with GPU addr..."
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Add libmesa_nir to a common LOCAL_STATIC_LIBRARIES defined by
ANV_STATIC_LIBRARIES so that its include path can be imported
automatically. Then ANV_INCLUDES is unnecessary and could be
eliminated.
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
The dummy library libmesa_anv_entrypoints is totally unnecessary.
The four VULKAN_GENERATED_FILES could be generated and built in
libmesa_vulkan_common directly. The libraries using the generated
headers should get it via the exported include path.
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
The libmesa_anv_entrypoints and libmesa_genxml are dummy libraries.
There is no reason to put them into LOCAL_WHOLE_STATIC_LIBRARIES.
Move libmesa_vulkan_util to the vulkan HAL which really needs it.
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
This value is supported since gen7. See also 8514c75a26 "i965: Set
compute shader shared memory max to 64k".
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Effectivley unused since dd7135d55d ("intel/compiler: Use the flrp
lowering pass for all stages on Gen4 and Gen5"). I had intended to
remove this code as part of that series, but I forgot.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Previously, an instruction like
mul(8) vgrf29.xy:F, vgrf25.yxxx:F, [-1F, 1F, 0F, 0F]
would get rewritten as
mul(8) vgrf0.yz:F, vgrf25.yyxx:F, [-1F, 1F, 0F, 0F]
The latter does not produce the correct result. The VF immediate in the
second should be either [-1F, -1F, 1F, 1F] or [0F, -1F, 1F, 0F]. This
commit produces the former.
Fixes: 1ee1d8ab46 ("i965/vec4: Reswizzle sources when necessary.")
Reviewed-by: Matt Turner <mattst88@gmail.com>
set bit15 (Disable Repacking for Compression) of CACHE_MODE_0 register
if the gen attribute, 'disable_ccs_repack' is set.
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
add a new attribute, 'disable_ccs_repack' to gen_device info, which
indicates whether repacking of components in certain pixel formats
before compression needs to be disabled to keep the compatibility
with decompression capability of display controller (gen11+)
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
correct bit fields information of CACHE_MODE_0 reg in current gen11.xml
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The "demote" intrinsic works like "discard" but don't change the
control flow, allowing derivative operations to work. This is the
semantics of D3D discard.
The "is_helper_invocation" intrinsic will return true for helper
invocations -- both the ones that started as helpers and the ones that
where demoted. This is needed to avoid changing the behavior of
gl_HelperInvocation which is an input (so not expected to change
during shader execution).
v2: Emit the discard jump and comment why it is safe. (Jason)
Rework the is_helper_invocation() that was stomping f0.1. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Pretty much every driver using nir_lower_io_to_temporaries followed by
nir_lower_io is going to want this. In particular, radv and radeonsi in
the next commits.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
load_fragcoord is already handled in common code for radeonsi, so we
don't need to do anything to handle it. However, there were some passes
creating NIR with the varying, so we switch them over to the sysval. In
the case of nir_lower_input_attachments which is used by both radv and
anv, we add handling for both until intel switches to using a sysval.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It was reported as unsupported previously. It should be importable
and is compatible with itself.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Fixes: 69cc6272fb ("anv: Implement VK_EXT_external_memory_host")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Do not use the view format when filling the surface state.
Fixes dEQP-VK.image.texel_view_compatible.compute.extended.texture.*
Fixes: fb1350c76f ("intel: Add and use helpers for level0 extent")
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If they never get used, dead code should clean them up. Also, we rework
the at_offset and at_sample intrinsics so they return a proper vec2
instead of returning things in PLN layout. Fortunately, copy-prop is
pretty good at cleaning this up and it doesn't result in any actual
extra MOVs.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Eric Engestrom