Even though we can't really do the parsing on behalf of the driver (it's
too complicated), storing it in the vk_image lets us provide a common
implementation of vkGetImageDrmFormatModifierPropertiesEXT(). It'll
also be useful in the next few commits for swapchain images.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12023>
This is mostly a bit of future-proofing. We never end up with offsets
that don't fit in 32 bits today because, thanks to driver limitations
caused by relocations, we don't allocate buffers bigger than 2GB today.
However, if we ever did, it's possible to create a surface on modern
platforms that consumes more than 4GB and we would end up with wrapping
in our offset calculations.
Acked-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11765>
When creating an image out of a swapchain on Android, the android
layer call will detect a VkBindImageMemorySwapchainInfoKHR in the
pNext chain of the vkBindImageMemory2() call and add a
VkNativeBufferANDROID in the chain. This is what we should use as
backing memory for that image.
v2: Fix a couple of obvious mistakes (Tapani)
v3: Silence build warning (Lionel)
Fix invalid object argument to vk_error() (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: bc3c71b87a ("anv: don't try to access Android swapchains")
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5180
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12244>
drm_i915_query_perf_config::data is an unsized array and declaring a
struct containing an unsized array that isn't at the end is a GNU
extension which trips up Android builds. Instead, stuff both into a
char array of the appropriate size. This emulates what you'd normally
do to allocate one of these with malloc only on the stack.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12308>
On Gfx4 and Gfx5, sel.l (for min) and sel.ge (for max) are implemented
using a separte cmpn and sel instruction. This lowering occurs in
fs_vistor::lower_minmax which is called very, very late... a long, long
time after the first calls to opt_cmod_propagation. As a result,
conditional modifiers can be incorrectly propagated across sel.cond on
those platforms.
No tests were affected by this change, and I find that quite shocking.
After just changing flags_written(), all of the atan tests started
failing on ILK. That required the change in cmod_propagatin (and the
addition of the prop_across_into_sel_gfx5 unit test).
Shader-db results for ILK and GM45 are below. I looked at a couple
before and after shaders... and every case that I looked at had
experienced incorrect cmod propagation. This affected a LOT of apps!
Euro Truck Simulator 2, The Talos Principle, Serious Sam 3, Sanctum 2,
Gang Beasts, and on and on... :(
I discovered this bug while working on a couple new optimization
passes. One of the passes attempts to remove condition modifiers that
are never used. The pass made no progress except on ILK and GM45.
After investigating a couple of the affected shaders, I noticed that
the code in those shaders looked wrong... investigation led to this
cause.
v2: Trivial changes in the unit tests.
v3: Fix type in comment in unit tests. Noticed by Jason and Priit.
v4: Tweak handling of BRW_OPCODE_SEL special case. Suggested by Jason.
Fixes: df1aec763e ("i965/fs: Define methods to calculate the flag subset read or written by an fs_inst.")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Dave Airlie <airlied@redhat.com>
Iron Lake
total instructions in shared programs: 8180493 -> 8181781 (0.02%)
instructions in affected programs: 541796 -> 543084 (0.24%)
helped: 28
HURT: 1158
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.35% max: 0.86% x̄: 0.53% x̃: 0.50%
HURT stats (abs) min: 1 max: 3 x̄: 1.14 x̃: 1
HURT stats (rel) min: 0.12% max: 4.00% x̄: 0.37% x̃: 0.23%
95% mean confidence interval for instructions value: 1.06 1.11
95% mean confidence interval for instructions %-change: 0.31% 0.38%
Instructions are HURT.
total cycles in shared programs: 239420470 -> 239421690 (<.01%)
cycles in affected programs: 2925992 -> 2927212 (0.04%)
helped: 49
HURT: 157
helped stats (abs) min: 2 max: 284 x̄: 62.69 x̃: 70
helped stats (rel) min: 0.04% max: 6.20% x̄: 1.68% x̃: 1.96%
HURT stats (abs) min: 2 max: 48 x̄: 27.34 x̃: 24
HURT stats (rel) min: 0.02% max: 2.91% x̄: 0.31% x̃: 0.20%
95% mean confidence interval for cycles value: -0.80 12.64
95% mean confidence interval for cycles %-change: -0.31% <.01%
Inconclusive result (value mean confidence interval includes 0).
GM45
total instructions in shared programs: 4985517 -> 4986207 (0.01%)
instructions in affected programs: 306935 -> 307625 (0.22%)
helped: 14
HURT: 625
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.35% max: 0.82% x̄: 0.52% x̃: 0.49%
HURT stats (abs) min: 1 max: 3 x̄: 1.13 x̃: 1
HURT stats (rel) min: 0.12% max: 3.90% x̄: 0.34% x̃: 0.22%
95% mean confidence interval for instructions value: 1.04 1.12
95% mean confidence interval for instructions %-change: 0.29% 0.36%
Instructions are HURT.
total cycles in shared programs: 153827268 -> 153828052 (<.01%)
cycles in affected programs: 1669290 -> 1670074 (0.05%)
helped: 24
HURT: 84
helped stats (abs) min: 2 max: 232 x̄: 64.33 x̃: 67
helped stats (rel) min: 0.04% max: 4.62% x̄: 1.60% x̃: 1.94%
HURT stats (abs) min: 2 max: 48 x̄: 27.71 x̃: 24
HURT stats (rel) min: 0.02% max: 2.66% x̄: 0.34% x̃: 0.14%
95% mean confidence interval for cycles value: -1.94 16.46
95% mean confidence interval for cycles %-change: -0.29% 0.11%
Inconclusive result (value mean confidence interval includes 0).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12191>
It's called anv_image_* so it really should take an anv_image. For the
couple of cases where we really want to pass in a set of aspects, we
leave an anv_aspect_to_plane() helper. anv_image_aspect_to_plane() is
then just a wrapper around it which grabs the aspects from the image.
While we're in the area, sprinkle some const around.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12141>
The Vulkan 1.2.184 spec says:
"When creating a VkImageView, if sampler Y′CBCR conversion is
enabled in the sampler, the aspectMask of a subresourceRange used by
the VkImageView must be VK_IMAGE_ASPECT_COLOR_BIT.
When creating a VkImageView, if sampler Y′CBCR conversion is not
enabled in the sampler and the image format is multi-planar, the
image must have been created with
VK_IMAGE_CREATE_MUTABLE_FORMAT_BIT, and the aspectMask of the
VkImageView’s subresourceRange must be VK_IMAGE_ASPECT_PLANE_0_BIT,
VK_IMAGE_ASPECT_PLANE_1_BIT or VK_IMAGE_ASPECT_PLANE_2_BIT."
Previously, for YCbCr images, we were flipping this around. For single-
plane views where VK_IMAGE_ASPECT_PLANE_N_BIT would be passed in by the
app, we would store VK_IMAGE_ASPECT_COLOR_BIT. For multi-plane views
where the client says VK_IMAGE_ASPECT_COLOR_BIT, we would store a all of
the planes. (There was also an extra bit of remapping that would
compact the planes in the non-existent case of a format with a non-
contiguous set of planes.) The idea behind this was that for things
like rendering or single-plane sampling, storage, or compute, we want it
to look as much like a single-plane image as possible but we wanted the
multi-plane case to be the awkward one.
This commit changes it around so that iview->aspects is always exactly
the subset of image->vk.aspects represented by the view. This is
identical to how aspects work for depth/stencil so it gains us some
consistency.
This commit also changes anv_image_view::aspect_mask to aspects to force
a full audit of the field. As can be seen, there are only a few uses of
this field and they're all mostly fine:
- A bunch of them are used to check for depth/stencil. That hasn't
changed.
- Most of the checks for color already used ANY_COLOR_BIT, only one
needed fixing.
- There's a check that both src/depth are color for MSAA resolves.
However, we don't support MSAA on YCbCr so there's no point in
checking for ANY_COLOR_BIT.
There is a hidden usage of planes in anv_descriptor_set_write_image_view
that's not as obvious. However, this function simply looks at
anv_image_view::n_planes and blindly fills out the descriptor
accordingly. As long as image views with a single plane continue to
claim n_planes == 1, this will be fine.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12141>
Previously, we initialized vplane in anv_CreateImageView to 0 and
incremented it every iteration of the aspect loop. This only works
because planes are guaranteed to be in aspect-bit-order which wasn't
documented anywhere. Instead, drop this assumption and burn a couple
CPU cycles properly calculating vplane.
While we're here, make iplane const as well.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12141>
When creating a single-plane view of a multi-plane image, we were
relying on vplane_aspect to be VK_IMAGE_ASPECT_COLOR_BIT so that
anv_get_format_plane of the single-plane view format would work.
Instead of relying on this quirk, we can drop vplane_aspect and rely
entirely on vplane to only be 0 in this case. In the case of depth or
stencil images, we still need to grab the format aspect but we can use
the actual aspect and don't need the vplane_aspect trickery.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12141>
The comment about modifiers is bogus because we check the modifier
before this check and return early. Also, there's no reason why we need
to check the requested aspect when we could check the format itself.
anv_image_aspect_to_plane will ensure that the requested aspect is one
that actually exists.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12141>
Jason Ekstrand