After preprocessing by glcpp all adjacent spaces were replaced by
single one and glsl parser received column-shifted shader source.
It negatively affected ast location set up and produced wrong error
messages for heavily-spaced shaders.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
GL_ARB_separate_shader_objects adds the ability to specify location
layouts for interstage inputs and outputs.
In addition, this extension makes 'in' and 'out' generally available for
shader inputs and outputs. This mimics the behavior of
GL_ARB_explicit_attrib_location.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Section 3.3 (Preprocessor) of the GLSL 1.30 spec (and later) and the
GLSL ES spec (all versions) say:
"All macro names containing two consecutive underscores ( __ ) are
reserved for future use as predefined macro names. All macro names
prefixed with "GL_" ("GL" followed by a single underscore) are also
reserved."
The intention is that names containing __ are reserved for internal use
by the implementation, and names prefixed with GL_ are reserved for use
by Khronos. Since every extension adds a name prefixed with GL_ (i.e.,
the name of the extension), that should be an error. Names simply
containing __ are dangerous to use, but should be allowed. In similar
cases, the C++ preprocessor specification says, "no diagnostic is
required."
Per the Khronos bug mentioned below, a future version of the GLSL
specification will clarify this.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Darius Spitznagel <d.spitznagel@goodbytez.de>
Cc: Tapani Pälli <lemody@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71870
Bugzilla: Khronos #11702
The -p option we now use when calling bison means that this variable will be
named glcpp_parser_debug not yydebug. This was not caught when the -p option
was added because this variable isn't used in the code as committed. (I prefer
the declaration to remain since it allows a developer to easily find this
variable name to enable debugging.)
This is the innocent-looking but killer test case to verify the bug fixed in
the preceding commit.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In commit 6005e9cb28 a new start state of NEWLINE_CATCHUP was added to the
lexer. This start state is used whenever the lexer is emitting a NEWLINE token
to emit additional NEWLINE tokens for any newline characters that were skipped
by an immediately preceding multi-line comment.
However, that commit erroneously entered the NEWLINE_CATCHUP state for
single-line comments. This is not desired since in the case of a single-line
comment, the lexer is not emitting any NEWLINE token. The result is that the
lexer will remain in the NEWLINE_CATCHUP state and proceed to fail to emit a
NEWLINE token for the subsequent newline character, (since the case to match \n expects only the INITIAL start state).
The fix is quite simple, remove the "BEGIN NEWLINE_CATCHUP" code from the
single-line comment case, (preserving it only in exactly the cases where the
lexer is actually emitting a NEWLINE token).
Many thanks to Petri Latvala for reporting this bug and for providing the
minimal test case to exercise it. The bug showed up only with a multi-line
comment which was followed immediately by a single-line comment (without any
intervening newline), such as:
/*
*/ // Kablam!
Since 6005e9cb28, and before this commit, that very innocent-looking
combination of comments would yield a parse failure in the compiler.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72686
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The check was in the wrong place, such that if a shader incorrectly put
a preprocessor token before the #version declaration, the version would
be resolved twice, leading to a segmentation fault when attempting to
redefine the __VERSION__ macro.
#extension GL_ARB_sample_shading: require
#version 130
void main() {}
Also, rename glcpp_parser_resolve_version to
glcpp_parser_resolve_implicit_version to avoid confusion.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The define was only available if
gl_extensions::AMD_shader_trinary_minmax was set, but no driver set it.
Since the extension is advertised by default, remove that field too.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: Maxence Le Doré <maxence.ledore@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Instead of defining preprocessor macros in glcpp_parser_create based on
the GL API, wait until the shader version has been resolved. Doing this
allows us to correctly set (and not set) preprocessor macros for
extensions allowed by the API but not the shader, as in the case of
ARB_ES3_compatibility.
The shader version has been resolved when the preprocessor encounters
the first preprocessor token, since the GLSL spec says
"The #version directive must occur in a shader before anything else,
except for comments and white space."
Specifically, if a #version token is found the version is known
explicitly, and if any other preprocessor token is found then the GLSL
version is implicitly 1.10.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71630
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The preprocessor currently accepts multiple else/elif-groups
per if-section. The GLSL-preprocessor is defined by the C++
specification, which defines the following parse-rule:
if-section:
if-group elif-groups(opt) else-group(opt) endif-line
This clearly only allows a single else-group, that has to come
after any elif-groups.
So let's modify the code to follow the specification. Add test
to prevent regressions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Carl Worth <cworth@cworth.org>
Cc: 10.0 <mesa-stable@lists.freedesktop.org>
The preprocessor has always replaced multi-line comments with a single space
character, (as required by the specification), but as of commit
bd55ba568b the lexer also emitted a NEWLINE
token for each newline within the comment, (in order to preserve line
numbers).
The emitting of NEWLINE tokens within the comment broke the rule of "replace a
multi-line comment with a single space" as could be exposed by code like the
following:
#define FOO a/*
*/b
FOO
Prior to commit bd55ba568b, this code defined
the macro FOO as "a b" as desired. Since that commit, this code instead
defines FOO as "a" and leaves a stray "b" in the output.
In this commit, we fix this by not emitting the NEWLINE tokens while lexing
the comment, but instead merely counting them in the commented_newlines
variable. Then, when the lexer next encounters a non-commented newline it
switches to a NEWLINE_CATCHUP state to emit as many NEWLINE tokens as
necessary (so that subsequent parsing stages still generate correct line
numbers).
Of course, it would have been more clear if we could have written a loop to
emit all the newlines, but flex conventions prevent that, (we must use
"return" for each token we emit).
It similarly would have been clear to have a new rule restricted to the
<NEWLINE_CATCHUP> state with an action much like the body of this if
condition. The problem with that is that this rule must not consume any
characters. It might be possible to write a rule that matches a single
lookahead of any character, but then we would also need an additional rule to
ensure for the <EOF> case where there are no additional characters available
for the lookahead to match.
Given those considerations, and given that the SKIP-state manipulation already
involves a code block at the top of the lexer function, before any rules, it
seems best to me to go with the implementation here which adds a similar
pre-rule code block for the NEWLINE_CATCHUP.
Finally, this commit also changes the expected output of a few, existing glcpp
tests. The change here is that the space character resulting from the
multi-line comment is now emitted before the newlines corresponding to that
comment. (Previously, the newlines were emitted first, and the space character
afterward.)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72686
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Two things make this code confusing:
1. The uncharacteristic manipulation of lexer start state outside of
flex rules.
2. The confusing semantics of the skip_stack (including the
"lexing_if" override and the SKIP_NO_SKIP state).
This new comment is intended to bring a bit more clarity for any readers.
There is no intended beahvioral change to the code here. The actual code
changes include better indentation to avoid an excessively-long line, and
using the more descriptive INITIAL rather than 0.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch implements the common support code required for the
GL_ARB_sample_shading extension.
V2: Move GL_ARB_sample_shading to ARB extension list.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Reviewed-by: Ken Graunke <kenneth@whitecape.org>
Everyone at the Khronos meeting was as surprised that GLSL didn't
already support this as we were. Several vendors said they'd ship it,
but there didn't seem to be enough interest to put in the effort to make
it ARB or KHR.
v2: Fix a couple typos and rename the spec file to
EXT_shader_integer_mix.spec. Suggested by Roland.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Page 17 of the GLSL 1.50.11 specification states:
"There is a built-in macro definition for each profile the
implementation supports. All implementations provide the following
macro:
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
To trigger the bug, it suffices to have a line-continuation followed by
a newline and then a non-line-continuation backslash.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This loop-control condition with a post-decrement operator would lead to
an underflow of collapsed_newlines. This in turn would cause a subsequent
execution of the loop to labor inordinately trying to return the loop-control
variable to a value of 0 again.
Fix this by dis-intertwining the test and the decrement.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65112
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2 [mattst88]:
- Rebase.
- #define GL_ARB_texture_query_lod to 1.
- Remove comma after ir_lod in ir.h for MSVC.
- Handled ir_lod in ir_hv_accept.cpp, ir_rvalue_visitor.cpp,
opt_tree_grafting.cpp.
- Rename textureQueryLOD to textureQueryLod, see
https://www.khronos.org/bugzilla/show_bug.cgi?id=821
- Fix ir_reader of (lod ...).
v3 [mattst88]:
- Rename textureQueryLod to textureQueryLOD, pending resolution of
Khronos 821.
- Add ir_lod case to ir_to_mesa.cpp.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
V2: - emit `sample` parameter properly for multisample texelFetch()
- fix spurious whitespace change
- introduce a new opcode ir_txf_ms rather than overloading the
existing ir_txf further. This makes doing the right thing in
the driver somewhat simpler.
V3: - fix weird whitespace
V4: - don't forget to include the new opcode in tex_opcode_strs[]
(thanks Kenneth for spotting this)
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
[V2] Reviewed-by: Eric Anholt <eric@anholt.net>
[V2] Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
First we test that line continuations are honored within a comment, (as
recently changed in glcpp), then we test that line continuations can be
disabled via an option within the context. This is tested via the new support
for a test-specific command-line option passed to glcpp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, we were only supporting line-continuation backslash characters
within lines of pre-processor directives, (as per the specification). With
OpenGL 4.2 and GLES3, line continuations are now supported anywhere within a
shader.
While changing this, also fix a bug where the preprocessor was ignoring
line continuation characters when a line ended in multiple backslash
characters.
The new code is also more efficient than the old. Previously, we would
perform a ralloc copy at each newline. We now perform copies only at each
occurrence of a line-continuation.
This commit fixes the line-continuation.vert test in piglit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will allow testing of disabled line-continuation on a case-by-case basis,
(with the option communicated to the preprocessor via the GL context).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will allow the test exercising disabled line continuations to arrange
for the --disable-line-continuations argument to be passed to the standalone
glcpp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
As the preprocessor becomes more sophisticated and gains more optional
behavior, it's easiest to just pass the GL context pointer to it so that
it can examine any fields there that it needs to (such as API version,
or the state of any driconf options, etc.).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The GLSL ES 3.0 spec (Section 12.17) says:
"GLSL ES 1.00 removed token pasting and other functionality."
NOTE: This is a candidate for the stable branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Simply emitting a nicely-formatted error message if any undefined macro is
encountered in a parser context expecting an expression.
With this commit, the following piglit test now passes:
spec/glsl-es-3.00/compiler/undefined-macro.vert
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Ian Romanick