Previously, when doing intrastage and interstage interface block
linking, we only checked the interface type; this prevented us from
catching some link errors.
We now check the following additional constraints:
- For intrastage linking, the presence/absence of interface names must
match.
- For shader ins/outs, the interface names themselves must match when
doing intrastage linking (note: it's not clear from the spec whether
this is necessary, but Mesa's implementation currently relies on
it).
- Array vs. nonarray must be consistent, taking into account the
special rules for vertex-geometry linkage.
- Array sizes must be consistent (exception: during intrastage
linking, an unsized array matches a sized array).
Note: validate_interstage_interface_blocks currently handles both
uniforms and in/out variables. As a result, if all three shader types
are present (VS, GS, and FS), and a uniform interface block is
mentioned in the VS and FS but not the GS, it won't be validated. I
plan to address this in later patches.
Fixes the following piglit tests in spec/glsl-1.50/linker:
- interface-blocks-vs-fs-array-size-mismatch
- interface-vs-array-to-fs-unnamed
- interface-vs-unnamed-to-fs-array
- intrastage-interface-unnamed-array
v2: Simplify logic in intrastage_match() for handling array sizes.
Make extra_array_level const. Use an unnamed temporary
interface_block_definition in validate_interstage_interface_blocks()'s
first call to definitions->store().
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v2: Add comments on the purpose of the auxiliary data structures.
Check for atomic counter overlaps. Use the contains_atomic()
convenience method. Add static assert with the number of expected
shader stages.
v3: Don't resize atomic arrays.
v4: Add comment on the reason why we don't resize atomic counter
arrays. Use 'strcmp(...) == 0' instead of '!strcmp(...)'.
v5 (idr): Don't use STL in the linker.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Mark atomic counters as read-only variables. Move offset overlap
code to the linker. Use the contains_atomic() convenience method.
v3: Use pointer to integer instead of non-const reference. Add
comment so we remember to add a spec quotation from the next GLSL
release once the issue of atomic counter aggregation within
structures is clarified.
v4 (idr): Don't use std::map because it's overkill. Add an assertion
that ctx->Const.MaxAtomicBufferBindings <= MAX_COMBINED_ATOMIC_BUFFERS.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, we only exposed them in desktop GL or with:
#extension GL_OES_standard_derivatives : enable
GLSL ES 3.00 includes these without an extension, so we need to expose
them by default.
Note that the above #extension line results in an error or desktop GL,
so we don't need to worry about this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Previously, when packing geometry shader input varyings like this:
in float foo[3];
in float bar[3];
lower_packed_varyings would declare a packed varying like this:
(declare (shader_in flat) (array ivec4 3) packed:foo[0],bar[0])
That's confusing, since the packed varying acutally stores all three
values of foo and all three values of bar.
This patch causes it to generate the more sensible declaration:
(declare (shader_in flat) (array ivec4 3) packed:foo,bar)
Note that there should be no functional change for users of geometry
shaders, since the packed name is only used for generating debug
output. But this should reduce confusion when using INTEL_DEBUG=gs.
Reviewed-by: Eric Anholt <eric@anholt.net>
New builtins added by GL_ARB_sample_shading:
in vec2 gl_SamplePosition
in int gl_SampleID
in int gl_NumSamples
out int gl_SampleMask[]
V2: - Use SWIZZLE_XXXX for STATE_NUM_SAMPLES.
- Use "result.samplemask" in arb_output_attrib_string.
- Add comment to explain the size of gl_SampleMask[] array.
- Make gl_SampleID and gl_SamplePosition system values.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch implements the common support code required for the
GL_ARB_sample_shading extension.
V2: Move GL_ARB_sample_shading to ARB extension list.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Reviewed-by: Ken Graunke <kenneth@whitecape.org>
This only operates on constant/uniform values for now, because otherwise I'd
have to deal with killing my available CSE entries when assignments happen,
and getting even this working in the tree ir was painful enough.
As is, it has the following effect in shader-db:
total instructions in shared programs: 1524077 -> 1521964 (-0.14%)
instructions in affected programs: 50629 -> 48516 (-4.17%)
GAINED: 0
LOST: 0
And, for tropics, that accounts for most of the effect, the FPS
improvement is 11.67% +/- 0.72% (n=3).
v2: Use read_only field of the variable, manually check the lod_info union
members, use get_num_operands(), rename cse_operands_visitor to
is_cse_candidate_visitor, move all is-a-candidate logic to that
function, and call it before checking for CSE on a given rvalue, more
comments, use private keyword.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This will simplify the addition of layout(location) qualifiers for
separate shader objects. This was validated with new piglit tests
arb_explicit_attrib_location/1.30/compiler/not-enabled-01.vert and
arb_explicit_attrib_location/1.30/compiler/not-enabled-02.vert.
v2: Refactor error checking to check_explicit_attrib_location_allowed
and eliminate the gotos. Suggested by Paul.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Use mode_string to get the name of the variable mode. Slightly change
the control flow. Both of these changes make it easier to support
separate shader object location layouts.
The format of the message changed because mode_string can return a
string like "shader output". This would result in an awkward message
like "vertex shader shader output..."
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
I made this a function (instead of a method of ir_variable) because it
made the change set smaller, and I expect that there will be an overload
that takes an ir_var_mode enum. Having both functions used the same way
seemed better.
v2: Add missing case for ir_var_system_value.
v3: Change the ir_var_mode_count case to just break. Move the assertion
and the return outside the switch-statment. In the unlikely event that
var->mode is an invalid value other than ir_var_mode_count, the
assertion will still fire, and in release builds we won't wind up
returning a garbage pointer. Suggested by Paul.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Since the separation of ir_var_function_in and ir_var_shader_in (similar
for out), this check is no longer necessary. Previously, global_scope
was the only way to tell which was which.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Future patches will add some extra code to this path, and some of that
code will want to exit from the explicit location code early.
v2: Change a geometry shader "break" to a "return" so that try to apply
a bogus geometry shader location qualifier (which could cause cascading
errors). Suggested by Paul.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This avoids a defect in lower_output_reads.
The problem is lower_output_reads treats the gl_FragData array as a single
variable. It first redirects all output writes to a temporary variable (array)
and then writes the whole temporary variable to the output, generating
assignments to all elements of gl_FragData.
BTW this pass can be modified to lower all arrays, not just inputs and outputs.
The question is whether it is worth it.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
v2: addressed Paul Berry's comments
Almost a trivial change, it boils down to renaming a few identifiers
so their names still make sense for opaque types other than sampler.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fix the linker to deal with intrinsic functions which are undefined
all the way down to the driver back-end, and introduce intrinsic
definition helpers in the built-in generator.
We still need to figure out what kind of interface we want for drivers
to communicate to the GLSL front-end which of the supported intrinsics
should use a default GLSL implementation and which should use a
hardware-specific override. As there's no default GLSL implementation
for atomic ops, this seems like something we can worry about later on.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Define local helper function to generate ir_call nodes in the
builtin generator.
And use it to forbid comparisons of opaque operands. According to the
GL 4.2 specification:
> Except for array indexing, structure member selection, and
> parentheses, opaque variables are not allowed to be operands in
> expressions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Fix GLSL version in which the type became available. Add
contains_atomic() convenience method. Split off atomic counter
comparison error checking to a separate patch that will handle all
opaque types. Include new ir_variable fields for atomic types.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch implements the common support code required for the
ARB_shader_atomic_counters extension. It defines the necessary data
structures for tracking atomic counter buffer objects (from now on
"ABOs") associated with some specific context or shader program, it
implements support for binding buffers to an ABO binding point and
querying the existing atomic counters and buffers declared by GLSL
shaders.
v2: Fix extension checks. Drop unused MAX_ATOMIC_BUFFERS constant.
Acked-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch makes sure that class destructors are called as they should
be when a C++ object allocated by ralloc is released.
Based on a previous patch by Kenneth Graunke, but it doesn't exhibit
the ~0.8% performance regression in shader compilation times because
we now use the HAS_TRIVIAL_DESTRUCTOR() macro to detect the typical
case where the indirect function call can be avoided because the
object's destructor doesn't need to do anything.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This will let us use strcasecmp() from anywhere inside Mesa without
having to worry about the fact that it doesn't exist in MSVC.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
I noticed this in a shader in Unigine Heaven that was spilling. While it
doesn't really reduce register pressure, it shaves a few instructions
anyway (7955 -> 7882).
v2: Fix turning "0 >> x" into "x" instead of "0" (caught by Erik
Faye-Lund).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
While ir_builder is slightly less efficient, we're only increasing the
work when there's actual optimization being done, and it's way more
readable code.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Matt and I had each screwed up these common required patterns recently, in
ways that wouldn't have been noticed for a long time if not for code
review. Just enforce it in the caller so that we don't rely on code
review catching these bugs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The main purpose of this patch is to increase readability of
the array code by introducing is_unsized_array() to glsl_types.
Some redundent is_array() checks are also removed, and small number
of other related clean ups.
The introduction of is_unsized_array() should also make the
ARB_arrays_of_arrays code simpler and more readable when it arrives.
V2: Also replace code that checks for unsized arrays directly with the
length variable
Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
v3 (Paul Berry <stereotype441@gmail.com>): clean up formatting.
Separate whitespace cleanups to their own patch.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
ARB_gpu_shader5's textureGather*() functions which take shadow samplers
have a separate `refz` parameter rather than adding it to the
coordinate.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Prior to ARB_gpu_shader5 / GLSL 4.0, the offset is required to be
a constant expression.
With that extension, it is relaxed to be an arbitrary expression.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In commit 1b4a737 (glsl: Support redeclaration of VS and GS
gl_PerVertex output), I added code to ensure that when an unnamed
gl_PerVertex interface block is redeclared, any ir_variables that
weren't included in the redeclaration are removed from the IR (and the
symbol table). This ensures that only those variables that were
explicitly redeclared may be used.
However, when I wrote this code, I neglected to match the variable
mode when finding variables to remove. This meant that redeclaring a
built-in output block might cause the built-in input gl_in to be
accidentally removed.
Fixes piglit test gs-redeclares-pervertex-out-only.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The GLSL 4.10 rules for redeclaration of built-in interface blocks
(which we've chosen to regard as clarifications of GLSL 1.50) only
require gl_PerVertex blocks to match in shaders that actually use
those blocks. The easiest way to implement this is to detect
situations where a compiled shader doesn't refer to any elements of
gl_PerVertex, and remove all the associated ir_variables from the
shader at the end of ast-to-ir conversion.
Fixes piglit tests
linker/interstage-{pervertex,pervertex-in,pervertex-out}-redeclaration-unneeded.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Normally when a built-in array (such as gl_ClipDistance) is
redeclared, we call get_variable_being_redeclared() to do the
redeclaration, and it in turn calls check_builtin_array_max_size() to
make sure that the redeclared array size isn't too large.
However when a built-in array is redeclared as part of redeclaring
gl_in, we don't call get_variable_being_redeclared() (since the
individual built-ins aren't each represented by their own ir_variable
anymore). So we need to add an explicit call to
check_builtin_array_max_size() to make sure the new array size isn't
too large.
Note: at the moment this is redundant with a test that's done at link
time, so there's no change to piglit results. But the patch that
follows will prevent link errors from being reported if gl_PerVertex
isn't used, so in order to prevent that patch from causing
regressions, we need to add the compile check now. Besides, it's
nicer to report this error at compile time anyhow.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
When program_resource_visitor visits variables that were created by
lower_named_interface_blocks, it needs to do extra work to un-do the
effects of lower_named_interface_blocks and construct the proper API
names.
Fixes piglit test
spec/glsl-1.50/execution/interface-blocks-api-access-members.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
These variables will need to be treated specially by
program_resource_visitor, so that they can be addressed through the
API using their interface block name (and array index, for interface
block arrays).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Later patches will use this information to do proper error checking of
interpolation qualifiers that appear inside of interface blocks.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
In future patches, we will need this in order to interpret
interpolation qualifiers that appear inside interface blocks.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Paul Berry