In case the GLSL version is 130 or higher, we've already enabled
ARB_shader_bit_encoding a bit earlier in this same function. So this
condition will always be true.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The PLBU seems to preserve scissor state between draws, and since lima doesn't
emit PLBU_CMD_SCISSORS() if scissor test is disabled, it uses state from previous draw.
Fix it by emitting PLBU_CMD_SCISSORS() for full fb if scissor test is disabled.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
SPIR-V 1.5 incorported the SPV_EXT_shader_viewport_index_layer but
splitting into the two capabilities above. Just handle them as we
support the extension already.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We can't deref list_(first/last)_entries unless we know we have at least
one. Instead, just use our IP we've been tracking as we go to set up the
start ip, and fill in the end IP as we walk instructions.
Fixes a complaint in valgrind on
dEQP-GLES3.functional.transform_feedback.* which sometimes has an
empty main (non-END) block when the VS inputs are just directly mapped
to outputs without any ALU ops.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Table 23.54 of the OpenGL 4.5 spec lists the minimum values for
GL_POINT_SIZE_RANGE as [1, 1]. So zero is not allowed (even though
arguably this could be useful for MSAA rendering, where a sub-1px
point might cover only some samples...)
This fixes the WebGL 2.0 conformance suite's state.gl-get-calls test
on Chromium on Linux, which uses desktop OpenGL. The test checks that
the minimum value of GL_ALIASED_POINT_SIZE_RANGE is 1. Unfortunately,
that query doesn't exist in desktop GL, so it checks POINT_SIZE_RANGE,
which is the anti-aliased value. There's not really anything better
for Chromium to do here, unfortunately. When running Chromium with
--api=es3, it maps it to the correct query and the test already works.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Previously, internalformat GL_RGBA and type GL_UNSIGNED_SHORT_5_5_5_1
was promoted to RGBA8888 as the table entry with the 5551 formats
is listed below the 8888 entry, and it also doesn't have GL_RGBA as
a possible internalformat.
Using actual 5551 fixes the following dEQP-EGL test:
- dEQP-EGL.functional.image.modify.tex_rgb5_a1_tex_subimage_rgba8
Reviewed-by: Eric Anholt <eric@anholt.net>
Currently scons puts them in src/mapi/glapi, meosn puts them in
src/mapi/glapi/gen. This results in some things being compilable only by
one or the other, put them in the same places so that everyone is happy.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
It's useful for analyzing shader binaries produced by ARM mali offline
compiler which outputs files in MBS format. MBS is mali binary shader,
currently parser just extracts shader binary and ignores everything else.
Reviewed-and-tested-by: Connor Abbott<cwabbott0@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Update GL headers and xml API from upstream Khronos registry (commit
3d0c3eb). Keep `BUILDING_MESA` quirk in glext.h.
mesa/extensions: Expose EXT_EGL_sync instead of MESA_EGL_sync to reflect
Khronos request of changing this extension's scope from MESA to EXT.
EGL_EGL_sync is also the name of the extension that has been merged into
the upstream Khronos GL registry.
Remove MESA_EGL_sync spec txt from Mesa tree as it is now published as
EXT by Khronos.
v1: Remove MESA_EGL_sync spec and squash commits (Eric E)
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Commit f3e978db incorrectly assumed the maximum number of
samplers was equal to the max number of defined samplers
e.g. where bindings skip slots.
This fixes an assert in si_nir_load_sampler_desc() for an
enemy territory quake wars shader. And fixes potential bugs with
incorrect bounds limiting in the same code for production builds
of mesa.
Fixes: f3e978db ("radeonsi/nir: Remove uniform variable scanning")
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
It's still disabled by default because transform feedback randomly
hangs and it seems like it's related to GDS (cf. RadeonSI).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise the next streamout operation will overwrite GDS. This
can be improved by tracking if there is a streamout operation in
flight. Currently the driver unconditionally flushes but that
doesn't matter much as NGG streamout is disabled by default.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
NGG streamout uses GDS and we have to make sure that another
process isn't going to overwrite GDS while our shaders are busy.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise the wave IDs are probably 0 and it hangs. NGG_WAVE_ID_EN
generates wave IDs for GDS OA.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This internal option is turned off by default because NGG streamout
still hangs. It seems like it's related to GDS as RadeonSI.
That option will be turned on once all issues are resolved.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Documentation for pipe_context::flush states:
"NOTE: use screen->fence_reference() (or equivalent) to transfer
new fence ref to **fence, to ensure that previous fence is unref'd"
Hence we need to unref previous out_fence.
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
A filed of nir_variable.location may be equel to -1.
That may cause copying to invalid address of list-node,
making some internal fields corrupted.
Patch fixes segfault during freeing context due to
corrupted address of ralloc_header.destructor.
v2: copy data if var is constant (Connor Abbott)
CC: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Fixes: b6d4753568 (nir/large_constants: De-duplicate constants)
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111676
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Vulkan applications can register with the following structure :
typedef struct VkApplicationInfo {
VkStructureType sType;
const void* pNext;
const char* pApplicationName;
uint32_t applicationVersion;
const char* pEngineName;
uint32_t engineVersion;
uint32_t apiVersion;
} VkApplicationInfo;
This enables the Vulkan implementations to apply workarounds based off
matching this description.
Here we add a new parameter for matching the driconfig options with
the following :
<device driver="anv">
<application engine_name_match="MyOwnEngine.*" engine_versions="10:12,40:42">
<option name="blaaah" value="true" />
</application>
</device>
v2: switch engine name match to use regexps
v3: Verify that the regexec returns REG_NOMATCH for match failure (Eric)
v4: Add missing bit that went to the following commit (Eric)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: 19.2 <mesa-stable@lists.freedesktop.org>
It was calloc'd to 0 which is PIPE_PRIM_POINTS, which means that we
fail to notice an initial primitive of points being new, and fail at
updating the "primitive is points or lines" field.
We do not need to reset this on device loss because we're tracking
the last primitive mode sent to us on the CPU via draw_vbo, not the
last primitive mode sent to the GPU.
Fixes several tests:
- dEQP-GLES3.functional.clipping.point.wide_point_clip
- dEQP-GLES3.functional.clipping.point.wide_point_clip_viewport_center
- dEQP-GLES3.functional.clipping.point.wide_point_clip_viewport_corner
Fixes: dcfca0af7c ("iris: Set XY Clipping correctly.")
Add a ppir dummy node for nir_ssa_undef_instr, create a reg for it and mark
it as undefined, so that regalloc can set it non-interfering to avoid
register pressure.
Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Vasily Khozuzhick <anarsoul@gmail.com>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
We are about to patch panfrost_flush() to flush all pending batches,
not only the current one. In order to do that, we need to move the
'flush single batch' code to panfrost_batch_submit().
While at it, we get rid of the existing pipelining logic, which is
currently unused and replace it by an unconditional wait at the end of
panfrost_batch_submit(). A new pipeline logic will be introduced later
on.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
panfrost_flush() is about to be reworked to flush all pending batches,
but we want the fence to block on the last one. Let's move the fence
creation logic in panfrost_flush() to prepare for this situation.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
panfrost_draw_vbo() Might call the primeconvert/without_prim_restart
helpers which will enter the ->draw_vbo() again. Let's delay
payloads[].offset_start initialization so we don't initialize them
twice.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
