We don't natively support BGRA format, instead we handle these
as RGBA and we lower the loads to swap components R and B.
However, the driver emits VPM loads based on the size of the
input variables so when we have a vec2 or float BGRA input,
it would only emit VPM loads for components 0 and 1, which is
not correct since we emit a load of component 2 to swap with
component 0.
v2: handle GL legacy vertex inputs gracefully.
Fixes:
dEQP-VK.draw.output_location.array.b8g8r8a8-unorm-highp-output-vec2
dEQP-VK.draw.output_location.array.b8g8r8a8-unorm-mediump-output-vec2
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7271>
There are two bits for the vector size of a vertex input, with the
value 0 meaning 4 components. The CLE decoder seems to try and dump
"4" instead of "0" is to be a bit more user friendly, but it had an
off-by-one error that would cause it to dump "2" instead.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7271>
Fix defects reported by Coverity Scan.
Uninitialized scalar field (UNINIT_CTOR)
uninit_member: Non-static class member buffer_access_type is not
initialized in this constructor nor in any functions that it
calls.
uninit_member: Non-static class member progress is not initialized
in this constructor nor in any functions that it calls.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7243>
Handle compressed stencil buffer transition from one layout to another
on gen12+.
When stencil compression is enabled, we have to initialize buffer via
stencil clear (HZ_OP) before any renderpass.
v2:
- Pass predicate bit false to anv_image_ccs_op (Nanley Chery)
v3:
- update aspect assertion (Nanley Chery)
v4:
- Make state decision based on anv_layout_to_aux_state instated of
anv_layout_to_aux_usage (Sagar Ghuge)
v5:
- No need to handle stencil CCS resolve case (Jason Ekstrand)
- Initialize buffer using HZ_OP (Nanley Chery)
v6: (Nanley Chery)
- Pass correct layer/level count.
- Remove local variable.
v7:
- Skip stencil initialization with HZ_OP packet if followed by fast
clear. (Nanley Chery)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2942>
All these instructions replicate the result of a N-component dot-product
to a vec4. Naming them fdot_replicatedN gives the impression that are
some sort of abstract dot-product that replicates the result to a vecN.
They also deviate from fdph_replicated... which nobody would reasonably
consider naming fdot_replicatedh.
Naming these opcodes fdotN_replicated more closely matches what they
are, and it matches the pattern of fdph_replicated.
I believe that the only reason these opcodes were named this way was
because it simplified the implementation of the binop_reduce function in
nir_opcodes.py. I made some fairly simple changes to that function, and
I think the end result is ok.
The bulk of the changes come from the sed rename:
sed --in-place -e 's/fdot_replicated\([234]\)/fdot\1_replicated/g' \
$(grep -r 'fdot_replicated[234]' src/)
v2: Use a named parameter to binop_reduce instead of using
isinstance(name, str). Suggested by Jason.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5725>
With swap interval 0, i.e. sync-to-vblank disabled.
This can be necessary for unthrottled drawing with Xwayland:
1) One buffer can be scanned out
2) One buffer can be pending in the kernel for a page flip
3) One buffer can be pending in the Wayland compositor
Therefore, with 3 buffers, the frame-rate could be capped much lower
than the throughput the GPU is capable of, in the worst case at the
Wayland compositor refresh rate.
(The native Wayland EGL backend always uses up to 4 buffers)
Leave the maximum number of buffers at 3 for swap interval != 0, it's
sufficient in that case to always be able to queue one frame ahead of
time.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1455https://gitlab.gnome.org/GNOME/mutter/-/issues/1462
Cc: mesa-stable
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7033>
We'd previously take the copy path. If we were actually flipping (in
which case skipped frames are more likely to occur), we'd ping-pong
between a smaller and larger number of back buffers, and frame-rate
could vary / take a dip due to the buffer management overhead.
While I'm not sure this is actually possible to hit at this point, it
definitely will be with the next change.
Cc: mesa-stable
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7033>
Previously, we would always allocate 3 buffers for page flipping. But 2
buffers can suffice for clients which always wait for buffer swaps to
complete before starting a new frame.
Therefore, keep track of the maximum number of buffers separately from
the current number, and only bump the latter if both current buffers are
busy.
Cc: mesa-stable
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7033>
The current blorp API only allows source layers for 3D images to be
integers. That is causing problems with the Vulkan API where we need
to be able to use a 3D layer that could be in between 2 layers.
This change allows a floating point value to be passed for blits and
internally sets up the input parameters to pass floating point values
to kernels.
v2: Use tex op to determinate what types are the coordinates (Jason)
Drop setting params->z (Lionel)
v3: Fix nir_texop_txf_ms_mcs op not considered as having integer coords (Lionel)
v4: Fix incorrect test on nir_texop_txf_ms_mcs (Ivan)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3458
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6909>
If we are blitting to tile boundaries we don't need to emit
tile loads. The exception to this is the case where we are
blitting only a subset of the pixel components in the image
(which we do for single aspect blits of D24S8), since in that
case we need to preserve the components we are not writing.
There is a corner case where some times we create framebuffers
that alias subregions of a larger image. In that case the edge
tiles are not padded and we can't skip the loads.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7247>
This can be useful for debugging or working around bugs such as
Mesa#106 where Wine is expecting to find a visual that isn't
available.
v2:
- split the indirect GL extension override to its own commit
- memset the bitfields to 0 in __glXExtensionsCtrScreen
Reviewed-by: Adam Jackson <ajax@redhat.com>
v3:
- slight rework necessary after splitting the computation of usable
extensions (Ian)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7212>
An upcoming commit will require to find an extension in a list. Rather
than duplicating part of the code from set_glx_extension, split it into
find_extension and set_glx_extension.
NOTE: set_glx_extension is a bit of a misnomer since it is also used
for gl extensions. This is why the find function is named
find_extension rather than find_glx_extension.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7212>
Fix defects reported by Coverity Scan.
Uninitialized scalar field (UNINIT_CTOR)
uninit_member: Non-static class member found_unsupported_op is not
initialized in this constructor nor in any functions that it calls.
uninit_member: Non-static class member found_expensive_op is not
initialized in this constructor nor in any functions that it calls.
uninit_member: Non-static class member found_dynamic_arrayref is not
initialized in this constructor nor in any functions that it calls.
uninit_member: Non-static class member is_then is not initialized in
this constructor nor in any functions that it calls.
uninit_member: Non-static class member then_cost is not initialized in
this constructor nor in any functions that it calls.
uninit_member: Non-static class member else_cost is not initialized in
this constructor nor in any functions that it calls.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7228>
Samuel Pitoiset