Coverity sees the if (mode >= BRW_PRIM_OFFSET (128)) test and assumes
that the else-branch might execute for mode to up 127, which out be out
of bounds.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Coverity sees that the functions immediately below the new assertions
dereference these pointers, but is unaware that an ENDIF always follows
an IF, etc.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
On gen9+ MOCS is an index into a table. It is 7 bits, and AFAICT, bit 0 is for
doing encrypted reads.
I don't recall how I decided to do this for BXT. I don't know this patch was
ever needed, since it seems nothing is broken today on SKL. Furthermore, this
patch may no longer be needed because of the ongoing changes with MOCS setup. It
is what is being used/tested, so it's included in the series.
The chosen values are the old values left shifted. That was also an arbitrary
choice.
v2: Use shift in MOCS to make it clear what we're doing. (Ken)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Without first running the bo through pushbuf_refn, the nouveau drm
library will have uninitialized structures regarding this bo, and will
insert incorrect data.
This fixes supertuxkart 0.9 crash on start (where it ends up doing a lot
of indirect draws).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Since we clear the TFB bufctx binding point above, we need to put all of
the active tfb's back in, even if they haven't changed since last time.
Otherwise the tfb may get moved into sysmem and the underlying mapping
will generate write errors.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
The only reason we touch glapi is to dlopen it in order to:
- make sure that the unresolved _glapi* symbols in the dri modules are
provided.
- fetch glFlush() and use it at various stages in the dri2 driver.
Cc: Chih-Wei Huang <cwhuang@linux.org.tw>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The whole of GBM does not rely on even a single symbol from the GL
dispatch library, unsuprisingly. The only need for it comes from the
unresolved symbols in the DRI modules, which are now correctly handled
with Frank's commit.
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Dri driver libs are not linked to pull in libglapi so gbm_create_device()
fails when it tries to dlopen them (unless the application is linked
with something that does pull in libglapi, like libGL).
Until dri drivers can be fixed properly, dlopen libglapi before trying
to dlopen them.
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Frank Henigman <fjhenigman@google.com>
[Emil Velikov: Drop misleading bugzilla link, mention that libname differs]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Already handled in the Makefile which includes the drivers/x11 subdir.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
We've moved the open with CLOEXEC idiom into a helper function, so
call it instead of duplicating the code.
This also replaces a couple of opens that didn't properly do CLOEXEC.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
We've moved the open with CLOEXEC idiom into a helper function, so
call it instead of duplicating the code here.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This is already our common idiom for opening files with CLOEXEC and
it's a little ugly, so let's share this one implementation.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Replacing dup() with fcntl F_DUPFD_CLOEXEC creates the duplicate
file descriptor with CLOEXEC so it won't be leaked to child
processes if the process fork()s later.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
If the shader doesn't specify number of invocations, assume one.
This fixes geometry shaders on state trackers other than Mesa (and
probably graw tests too.)
Trivial.
This extends the draw code to add support for invocations.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is just for softpipe, llvmpipe won't work without
some changes.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is required for ARB_gpu_shader5 support in softpipe.
v2: add support to txd/txf/txq paths.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These are basically just moves, so they should be safe as well.
When disabling i965's GLSL IR level scalarizer (channel expressions)
pass, I started seeing NIR code like this:
if ssa_21 {
block block_1:
/* preds: block_0 */
vec4 ssa_120 = vec4 ssa_82, ssa_83, ssa_84, ssa_30
/* succs: block_3 */
} else {
block block_2:
/* preds: block_0 */
/* succs: block_3 */
}
block block_3:
/* preds: block_1 block_2 */
vec4 ssa_33 = phi block_1: ssa_120, block_2: ssa_2
Previously, the GLSL IR scalarizer pass would break the vec4 into a
series of fmovs, which were allowed by the peephole pass. But with
the vec4 operation, they were not. We want to keep getting selects.
Normal i965 on Broadwell:
instructions in affected programs: 200 -> 176 (-12.00%)
helped: 4
With brw_fs_channel_expressions() disabled:
instructions in affected programs: 1832 -> 1646 (-10.15%)
helped: 30
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This was originally only used by the vertex shader, but it's now used by
the geometry shader as well, and will also eventually be used for
tessellation control and evaluation shaders.
I suspect it will be easier to find in a file named after the concept.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
When we're done emitting the code for a loop, we need to visit the new
break block, which is the merge block of the current loop, rather than
the old merge block, which is the merge block of the loop containing the
one we just emitted code for.
This implements a workaround (exact excerpt as a comment in the code). The docs
specify [clearly, after you struggle for a while] that the offset isn't relative
to state base. This actually makes sense. This fixes hangs on SKL.
Buffer #0 is meant to be used for normal uniforms.
Buffer #1 is typically used for gather constants when using RS.
Buffer #1-#3 could be used to push a bunch of UBO data which would just be
somewhere in memory, and not relative to the dynamic state.
NOTE: I've moved away from the ternary operator for the new gen9 conditions.
Admittedly it's probably not great to do this, but I really want to fix this all
up in the subsequent patch and doing it here makes that diff a lot nicer. I want
to split out the gen8/9 code to make the function a bit more readable, but to
keep this easily cherry-pickable I am doing this fix first. If we decide not to
merge the cleanup patch then I can revisit this.
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Valtteri Rantala <Valtteri.rantala@intel.com>
It allows us to remove ilo_ib_state::draw_start_offset and
ILO_PRIM_RECTANGLES. gen6_3d_translate_pipe_prim() is also replaced by
ilo_translate_draw_mode().
Use the newly-introduced NV_VRAM_DOMAIN() macro to support alternative
VRAM domains for chips that do not have dedicated video memory.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Some GPUs (e.g. GK20A, GM20B) do not embed VRAM of their own and use
the system memory as a backend instead. For such systems, allocating
objects in VRAM results in errors since the kernel will not allow
VRAM objects allocations.
This patch adds a vram_domain member to struct nouveau_screen that can
optionally be initialized to an alternative domain to use for VRAM
allocations. If left untouched, NOUVEAU_BO_VRAM will be used for
systems that embed VRAM, and NOUVEAU_BO_GART will be used for VRAM-less
systems.
Code that uses GPU objects is then expected to use the NV_VRAM_DOMAIN()
macro in place of NOUVEAU_BO_VRAM to ensure correct behavior on
VRAM-less chips.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Martin Peres <martin.peres@free.fr>
For query_levels, we generate a getinfo with writemask of (z), which RA
will consider as size==3. But we were still generating four fanouts.
Which meant that RA would see it as two different register classes,
depending on the path to definer. Ie. on the getinfo instruction itself
it would see size==3, but when chasing back through the fanouts it would
see size==4.
Easiest way to solve that is to just generate the chain of neighboring
fanouts to have the correct size in the first place.
Note: we may eventually want split_dest() to take start/end or wrmask
instead, since really we only need size==1. But RA is not clever enough
for that, query_levels is not that common, and the other two registers
that get allocated are never used so those register slots can be
immediately re-used. So bunch of work for probably no real gain.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We get this information from NIR (which gets it from sview decl in tgsi
when translating from tgsi), so no need to maintain shader variants for
this.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This shuffles things around to allow the shader to have multiple basic
blocks. We drop the entire CFG structure from nir and just preserve the
blocks. At scheduling we know whether to schedule conditional branches
or unconditional jumps at the end of the block based on the # of block
successors. (Dropping jumps to the following instruction, etc.)
One slight complication is that variables (load_var/store_var, ie.
arrays) are not in SSA form, so we have to figure out where to put the
phi's ourself. For this, we use the predecessor set information from
nir_block. (We could perhaps use NIR's dominance frontier information
to help with this?)
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Matt Turner