This can have two main uses:
* If we suspect a problem with TFU copies, we can disable it and
check if other codepaths gets a test/app working.
* To test other codepaths, as in general, TFU is the preferred
option for copies.
Note that for now this is only for v3dv, as for v3d, mipmap generation
uses TFU without an alternative codepath.
With this option we also adds an assert if we try to submit a TFU job,
just in case we keep adding other methods that use TFU, and forget to
include the debug option there.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21952>
This is an inline function with a compile-constant switch, so I expect
the compiler wouldn't produce any better code like this, but for humans
it's easier to read when function calls are not embedded into other
function calls.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21835>
Enable support for the following extensions, which are already supported
by the driver and shared wsi code, and were just missing enables inside
v3dv_device:
VK_EXT_direct_mode_display, VK_EXT_acquire_drm_display,
VK_EXT_acquire_xlib_display.
Successfully tested on RPi 400, RaspberryPi OS 11, with X11 RandR output
leasing to lease a RandR output and use it for direct display mode.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21529>
As we support VK_EXT_image_drm_format_modifier, we could receive
VK_IMAGE_ASPECT_MEMORY_PLANE_0/1/2_BIT_EXT flags.
Fixes several tests like this:
dEQP-VK.drm_format_modifiers.create_explicit_modifier.*
when using CTS 1.3.5.0
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21463>
Currently, we postpone binning syncs until we record draw calls
and can validate if any of them require accessing protected
resources in the binning stage, however, if the draw calls are
recorded in a secondary command buffer and the barriers have
been recorded in the primary command buffer, we won't apply the
binning sync in the secondary when we record the draw calls
and so we must apply it when we execute the secondary in the
primary.
Fixes flakyness in:
dEQP-VK.api.command_buffers.record_many_draws_secondary_2
cc: mesa-stable
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21162>
The CLE parser in the sim will read this many bytes for each instruction
in a CL, so we should ensure we have at least that many bytes available
in the BO when reading the last instruction, otherwise we can trigger
a GMP violation. It is not clear whether this behavior applies to real
hardware too.
cc: mesa-stable
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21162>
For the common case where we're emitting packet we don't need to
update the cl_out pointer and then store the result in cl->next,
we can directly update cl->next.
This shows a small improvement in vkoverhead's scores for basic
draw tests.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20897>
While we are already ensuring we allocate at least 8192 bytes should
this not be the first allocation and our allocations are typically just
a few bytes, multilayered framebuffers with large numbers of layers may
require more space than that in a single allocation.
Fixes: 3325950648 ('v3dv: increase BO allocation size when growing CLs')
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20871>
Commit e07c5467 ("v3dv/format: use XYZ1 swizzle for three-component formats")
removes the only code that handled the clamp_to_transparent_black_border
variable. Therefore, the variable can be deleted, as it is not currently
being used.
Fixes: e07c5467 ("v3dv/format: use XYZ1 swizzle for three-component formats")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20746>
Note that as we are enabling the feature, we need to set the
VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT_KHR for any format
that supports STORAGE_IMAGE_BIT, from spec:
"An implementation that supports
VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT for any format from the given
list of formats and supports shaderStorageImageReadWithoutFormat
must support VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT
for that same format if Vulkan 1.3 or the
VK_KHR_format_feature_flags2 extension is supported."
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20744>
Original patches wrote by Ella Stanforth.
Alejandro Piñeiro main changes (skipping the small fixes/typos):
* Reduced the list of supported formats to
VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM and
VK_FORMAT_G8_B8R8_2PLANE_420_UNORM, that are the two only
mandatory by the spec.
* Fix format features exposed with YCbCr:
* Disallow some features not supported with YCbCr (like blitting)
* Disallow storage image support. Not clear if really useful. Even
if there are CTS tests, there is an ongoing discussion about the
possibility to remove them.
* Expose VK_FORMAT_FEATURE_COSITED_CHROMA_SAMPLES_BIT, that is
mandatory for the formats supported.
* Not expose VK_FORMAT_FEATURE_2_MIDPOINT_CHROMA_SAMPLES_BIT. Some
CTS tests are failing right now, and it is not mandatory. Likely
to be revisit later.
* We are keeping VK_FORMAT_FEATURE_2_DISJOINT_BIT and
VK_FORMAT_FEATURE_2_MIDPOINT_CHROMA_SAMPLES_BIT. Even if they
are optional, it is working with the two formats that we are
exposing. Likely that will need to be refined if we start to
expose more formats.
* create_image_view: don't use hardcoded 0x70, but instead doing an
explicit bit or of VK_IMAGE_ASPECT_PLANE_0/1/2_BIT
* image_format_plane_features: keep how supported aspects and
separate stencil check is done. Even if the change introduced was
correct (not sure about that though), that change is unrelated to
this work
* write_image_descriptor: add additional checks for descriptor type,
to compute properly the offset.
* Cosmetic changes (don't use // for comments, capital letters, etc)
* Main changes coming from the review:
* Not use image aliases. All the info is already on the image
planes, and some points of the code were confusing as it was
using always a hardcoded plane 0.
* Squashed the two original main patches. YCbCr conversion was
leaking on the multi-planar support, as some support needed
info coming from the ycbcr structs.
* Not expose the extension on Android, and explicitly assert that
we expect plane_count to be 1 always.
* For a full list of review changes see MR#19950
Signed-off-by: Ella Stanforth <estanforth@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19950>
Although for any buffer created by the user, or any API that can be
called by the user (like GetDeviceBufferMemoryRequirements) the
alignment is V3D_NON_COHERENT_ATOM_SIZE, there are internal uses of a
buffer that could require a fine-grained alignment (like when used as
a alias for a image, that has different alignment requirements).
Note that an alternative would have created a
v3dv_buffer_init_with_alignment (or similar name), but this option
seemed easier.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19950>
NIR will automatically lower all of these opcodes unless the driver
specifies that it can handle them natively. We don't have any hardware
support for any of these opcodes though, so we just let NIR lower
all of them.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20639>
Currently, process_singlesync_signals() checks if fd == -1 to handle
possible errors in the drmSyncobjExportSyncFile function. But, fd is not
initialized, which means that drmSyncobjExportSyncFile might fail and
the error will not be handled as fd might not be equal to -1.
Therefore, initialize the fd variable with value -1 to ensure proper
error handling.
cc: mesa-stable
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20475>
So far we have been only restoring dirty dynamic states used by meta
pipelines however, static state from meta pipelines will also clear
dirty flags, preventing follow-up draw calls in the command buffer
to honor these if they are flagged as dynamic states in their
pipelines. Fix this by always resetting all dirty state flags after
a meta operation so we re-emit all the state we need with the next draw
call.
Fixes:
dEQP-VK.dynamic_state.monolithic.image.clear
cc: mesa-stable
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20356>
Nothing in the spec seems to require that the number of stages for
which creation feedback is requested must match the number of stages
available in the pipeline. In fact, the spec explicitly mentions
that this number could be 0:
"If pipelineStageCreationFeedbackCount is not 0,
pPipelineStageCreationFeedbacks must be a valid pointer to an
array of pipelineStageCreationFeedbackCount
VkPipelineCreationFeedback structures"
Fixes an assert crash in:
dEQP-VK.pipeline.monolithic.creation_feedback.graphics_tests.vertex_stage_fragment_stage_no_cache_zero_out_feedback_cout
cc: mesa-stable
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20352>
If we can't use the TLB to do a subpass resolve we have a fallaback
that emits separate image resolves, but this fallback was only
handling color resolves. This adds depth/stencil as well.
Fixes some of the issues we have with CTS 1.3.4 in:
dEQP-VK.pipeline.monolithic.multisample.misc.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20331>
For these we always want to use sample_0, averaging is reserved for
color formats. We were already doing this correctly for depth/stencil
resolved in render passes, but not for those happening through
vkCmdResolveImage.
Fixes some of the issues we have with CTS 1.3.4 in:
dEQP-VK.pipeline.monolithic.multisample.misc.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20331>
attachment state is only relevant during render passes, however,
there is a corner case: if we can't resolve an attachment in a
subpass using the hardware, we emit a manual image resolve in the
driver which can trigger a meta operation via blit. In this case,
we pretend we are not in a render pass (since vulkan disallows
blits/resolves in a render pass) but we really want to keep the
attachment state after the meta operation.
Fixes some of the issues we have with CTS 1.3.4 in:
dEQP-VK.pipeline.monolithic.multisample.misc.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20331>
The idea in the single sync path is that we serialize any job that
needs to wait, however, our ANY queue syncobj only tracks the last job
submitted to any hardware queue, so in practice when we wait on this
we are only serializing against the queue to which we have submitted
the last job, which is not correct.
Fix that by accumulating the last job sync into the ANY queue synbcobj
to ensure that waiting on this syncobj effectively waits on all
hardware queues.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20078>
Instead of keeping a free list of "event descriptors" which are
just the offsets in the BO state that are available, pre-allocate
the events. This is simpler as it doesn't require to allocate these
event descriptors at all.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20053>
Iago Toral Quiroga