ci/baremetal: Remove legacy support for unused devices

Clean up unused remnants for old devices that are no longer used.

Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34451>

.gitlab-ci/bare-metal/cisco-2960-poe-off.sh

@@ -1,17 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2086 # we want word splitting
-
-if [ -z "$BM_POE_INTERFACE" ]; then
-    echo "Must supply the PoE Interface to power down"
-    exit 1
-fi
-
-if [ -z "$BM_POE_ADDRESS" ]; then
-    echo "Must supply the PoE Switch host"
-    exit 1
-fi
-
-SNMP_KEY="1.3.6.1.4.1.9.9.402.1.2.1.1.1.$BM_POE_INTERFACE"
-SNMP_OFF="i 4"
-
-snmpset -v2c -r 3 -t 30 -cmesaci "$BM_POE_ADDRESS" "$SNMP_KEY" $SNMP_OFF

.gitlab-ci/bare-metal/cisco-2960-poe-on.sh

@@ -1,22 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2086 # we want word splitting
-
-if [ -z "$BM_POE_INTERFACE" ]; then
-    echo "Must supply the PoE Interface to power up"
-    exit 1
-fi
-
-if [ -z "$BM_POE_ADDRESS" ]; then
-    echo "Must supply the PoE Switch host"
-    exit 1
-fi
-
-set -ex
-
-SNMP_KEY="1.3.6.1.4.1.9.9.402.1.2.1.1.1.$BM_POE_INTERFACE"
-SNMP_ON="i 1"
-SNMP_OFF="i 4"
-
-snmpset -v2c -r 3 -t 10 -cmesaci "$BM_POE_ADDRESS" "$SNMP_KEY" $SNMP_OFF
-sleep 3s
-snmpset -v2c -r 3 -t 10 -cmesaci "$BM_POE_ADDRESS" "$SNMP_KEY" $SNMP_ON

.gitlab-ci/bare-metal/poe-powered.sh

@@ -144,33 +144,6 @@ fi
 
 date +'%F %T'
 
-# Set up the pxelinux config for Jetson Nano
-mkdir -p /tftp/pxelinux.cfg
-cat <<EOF >/tftp/pxelinux.cfg/default-arm-tegra210-p3450-0000
-PROMPT 0
-TIMEOUT 30
-DEFAULT primary
-MENU TITLE jetson nano boot options
-LABEL primary
-      MENU LABEL CI kernel on TFTP
-      LINUX Image
-      FDT tegra210-p3450-0000.dtb
-      APPEND \${cbootargs} $BM_CMDLINE
-EOF
-
-# Set up the pxelinux config for Jetson TK1
-cat <<EOF >/tftp/pxelinux.cfg/default-arm-tegra124-jetson-tk1
-PROMPT 0
-TIMEOUT 30
-DEFAULT primary
-MENU TITLE jetson TK1 boot options
-LABEL primary
-      MENU LABEL CI kernel on TFTP
-      LINUX zImage
-      FDT tegra124-jetson-tk1.dtb
-      APPEND \${cbootargs} $BM_CMDLINE
-EOF
-
 # Create the rootfs in the NFS directory
 . $BM/rootfs-setup.sh /nfs
 

.gitlab-ci/bare-metal/telnet-buffer.py

@@ -1,41 +0,0 @@
-#!/usr/bin/python3
-
-# Copyright © 2020 Christian Gmeiner
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice (including the next
-# paragraph) shall be included in all copies or substantial portions of the
-# Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-# IN THE SOFTWARE.
-#
-# Tiny script to read bytes from telnet, and write the output to stdout, with a
-# buffer in between so we don't lose serial output from its buffer.
-#
-
-import sys
-import telnetlib
-
-host = sys.argv[1]
-port = sys.argv[2]
-
-tn = telnetlib.Telnet(host, port, 1000000)
-
-while True:
-    bytes = tn.read_some()
-    sys.stdout.buffer.write(bytes)
-    sys.stdout.flush()
-
-tn.close()

.gitlab-ci/container/baremetal_build.sh

@@ -33,30 +33,11 @@ if [[ $arch == "arm64" ]]; then
     DEVICE_TREES=""
     DEVICE_TREES="$DEVICE_TREES apq8016-sbc-usb-host.dtb"
     DEVICE_TREES="$DEVICE_TREES apq8096-db820c.dtb"
-    DEVICE_TREES="$DEVICE_TREES tegra210-p3450-0000.dtb"
-    DEVICE_TREES="$DEVICE_TREES imx8mq-nitrogen.dtb"
 
     for DTB in $DEVICE_TREES; do
 	curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
             -O "${KERNEL_IMAGE_BASE}/arm64/$DTB"
     done
 
-    popd
-elif [[ $arch == "armhf" ]]; then
-    mkdir -p /baremetal-files
-    pushd /baremetal-files
-
-    curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
-        -O "${KERNEL_IMAGE_BASE}"/armhf/zImage
-
-    DEVICE_TREES=""
-    DEVICE_TREES="$DEVICE_TREES imx6q-cubox-i.dtb"
-    DEVICE_TREES="$DEVICE_TREES tegra124-jetson-tk1.dtb"
-
-    for DTB in $DEVICE_TREES; do
-	curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
-            -O "${KERNEL_IMAGE_BASE}/armhf/$DTB"
-    done
-
     popd
 fi

.gitlab-ci/container/debian/baremetal_arm_test.sh

@@ -42,15 +42,3 @@ curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
     -o /usr/share/snmp/mibs/SNMPv2-SMI.txt
 
 . .gitlab-ci/container/baremetal_build.sh
-
-mkdir -p /baremetal-files/jetson-nano/boot/
-ln -s \
-    /baremetal-files/Image \
-    /baremetal-files/tegra210-p3450-0000.dtb \
-    /baremetal-files/jetson-nano/boot/
-
-mkdir -p /baremetal-files/jetson-tk1/boot/
-ln -s \
-    /baremetal-files/zImage \
-    /baremetal-files/tegra124-jetson-tk1.dtb \
-    /baremetal-files/jetson-tk1/boot/